



LuxR Modux 2 Hanging Light - Brass - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Small Brass Light You Can Hang from a Ceiling or Tree
The LuxR Modux 2 Hanging Light is designed to be suspended from a ceiling or from trees, to give downward light or a dynamic moonlighting effect. The head is small, just 40.6mm across with a 75mm body, but it hangs from a stainless steel cable in 1m or 3m lengths, so check the drop you need before you order.
Machined Brass
This light is precision machined from brass. The light source is a 2 watt Cree LED with a CRI of 90 plus, which helps foliage and stonework look true to colour. It is rated IP68 for protection against dust and water.
Choose Your Beam, Colour and Lens
- Beam: 26º is a narrow beam, 36º is a medium beam, and 74º is a wide beam. A narrow beam from height gives a defined pool of light, while a wide beam spreads it out.
- Colour temperature: 2200K is a very warm glow, 2700K and 3000K are warm white, and 4000K is a crisper neutral white.
- Lens: clear gives the sharpest beam, while frosted softens the edges of the light.
How It Works
Hang the light from its stainless steel cable, then connect it to a suitable power supply. The fitting runs on low voltage, so it needs a suitable constant current driver, which is not included, and it is wired in series. It is dimmable when paired with a suitable dimmable driver. The Cree LED can be replaced or swapped for a colour LED, and the optic can be changed to alter the beam width.
Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.
Where It Works Best
Hang it from a pergola, a porch ceiling or the branches of a mature tree. Used high up, it can light a table or path below, or give a soft moonlight effect through the canopy. It is also available in M4.
Good to Know
- Dimensions: 40.6mm diameter and 75mm body length. Stainless steel suspension cable in 1m or 3m lengths.
- Material: brass.
- Rated IP68 for protection against dust and water.
- 2 watt LED at 85 lumens per watt, low voltage, series wiring.
- Made in New Zealand by the makers of Hunza.
- Usually ships in 2 to 3 days. If out of stock, allow 3 to 5 weeks.
Questions People Ask
How big is the hanging light, and how long is the cable?
The head is 40.6mm in diameter with a 75mm body. The stainless steel suspension cable is available in 1m or 3m lengths, so measure the drop you need.
Does it come with a driver?
No. It is a low voltage fitting and needs a suitable constant current driver, sold separately. A dimmable driver lets you dim the light. We recommend a registered electrician installs it.
Can I hang it from a tree?
Yes. It is designed to be suspended from a ceiling or from trees, for downward light or a moonlighting effect.
Which beam angle should I choose?
Choose 26º for a tight pool of light, 36º for a medium spread, and 74º for a wide wash across a larger area.
Can I change the LED later?
Yes. The Cree LED can be replaced or swapped for a colour LED, and the optic can be changed to alter the beam width.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us













