Leverint Temple Small Pillar Light

A Slim Column of Ribbed Glass for the Wall

The Temple Pillar Light Small is a narrow wall light built around a vertical column of ribbed hand blown glass, held to the wall by two round fixings. It stands 480mm tall and 100mm wide, projecting 60mm, which makes it the most compact of the four Temple Pillar sizes. The light comes from integrated LED strips rather than bulbs, and the ribs break it into soft vertical lines that glow along the wall. Leverint suggests it as a duo, so think of one on each side of a mirror, a bed or a doorway.

Choose Your Finish

Each Temple Pillar Light is made to order in your choice of hand blown glass, plated metal finish and LED colour, chosen from the swatches and dropdowns above when you order. The glass comes in ribbed or fine ribbed, and Leverint plates the metalwork in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. The integrated LED strip is available in 2700K warm, 3000K warm white or 4000K natural white. Because the glass is blown by hand and the metal is plated by hand, the colour and texture of your light may vary slightly from the photos, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.

How It Works

This is a hardwired, mains powered fitting. Two LED linear COB strips sit behind the glass and run from one external driver, which Leverint says needs to be concealed within a cavity, so it is worth planning where the driver will go before the wall is finished. The fitting is mains dimmable, and Leverint recommends a TRIAC dimmer, leading edge only. We recommend that a qualified electrician installs it, ideally one who is NICEIC registered.

Where It Works Best

Leverint points to contemporary bedrooms, hallways and bathrooms, and at 480mm tall the Small suits a bedside wall, a narrow hallway or either side of a bathroom mirror. Leverint rates the Temple Pillar Light IP44, so it is suitable for bathroom use. Our guide to bathroom lighting zones explains where an IP44 fitting can go in a bathroom.

Made By Leverint

Leverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every light. Keeping the ribbed glass even along the whole length of a tall, narrow shape like this one is a good test of that skill.

Good to Know

• Handmade to order by Leverint in the UK; Leverint quotes approximately 4 to 6 weeks, so please check the current lead time before ordering
• As a made to order light, it cannot be returned unless it arrives faulty
• 480mm tall x 100mm wide, projecting 60mm from the wall; weighs approximately 3.1kg. Please check these measurements against your wall before ordering
• Integrated LED, so there are no bulbs to buy; choose 2700K, 3000K or 4000K from the dropdown above
• Runs from one external driver, which must be concealed within a cavity
• Mains dimmable with a TRIAC dimmer, leading edge only
• IP44 rated, CE and UKCA marked; 2 year warranty
• Hand blown glass and hand plated metal, so colour and texture may vary slightly from the photos
• Polish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the light
• We recommend installation by a qualified electrician, ideally NICEIC registered

Questions People Ask

What glass, metal and LED colour can I choose?

The glass comes in ribbed or fine ribbed. The metalwork can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel, and the integrated LED is available in 2700K warm, 3000K warm white or 4000K natural white. Pick your combination from the swatches and dropdowns on this page when you order.

Does the Temple Pillar Light Small use bulbs, and can it be dimmed?

It has integrated LED strips, so there are no bulbs to buy or replace. It is mains dimmable when used with a TRIAC dimmer, leading edge only, which is the type Leverint recommends.

Does it need an electrician to fit it?

Yes, we recommend that a qualified electrician installs it, ideally one who is NICEIC registered. It is a hardwired fitting with an external driver that has to be concealed within a cavity, so the wiring and the driver position should be planned and fitted properly.

Can I use the Temple Pillar Light in a bathroom?

Leverint rates it IP44, so it is suitable for bathroom use. Where exactly it can go depends on the bathroom lighting zones, and it should be installed by a qualified electrician.

How big and heavy is the Temple Pillar Light Small?

It measures 480mm tall by 100mm wide and projects 60mm from the wall. It weighs approximately 3.1kg.

How long does it take, and can I return it?

Each Temple Pillar Light is handmade to order by Leverint in the UK, with a lead time of approximately 4 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.

Shade Height: 48cm
Width: 10cm
Projection: 6cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.