A solid 316 marine grade stainless steel eyelid step light with Hunza's integrated Pure LED chip built in, directing light down across steps and paths. IP67 rated, low voltage, requires an LED driver, sold separately.
Hunza Pure LED Step Light Solid Eyelid - Stainless Steel - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Solid Stainless Steel Eyelid Step Light With Integrated Pure LED
This is Hunza's Pure LED Step Light Solid Eyelid in marine grade stainless steel, the same solid metal eyelid hood as the standard version, but built around Hunza's own Pure LED chip instead of a separate replaceable lamp. The eyelid hood curves down and forward, shielding the light source from view while directing light across the step or path below.
Solid 316 Stainless Steel Eyelid
The flange and eyelid hood are cast from marine grade 316 stainless steel, not plated onto another metal underneath, with a brushed finish and Hunza's small stamped H mark on the face. 316 grade is the specification Hunza uses where a fitting needs real resistance to corrosion, which is why it suits coastal and exposed sites. It can still pick up a light surface tarnish in some environments, and Hunza recommends regular washing to keep it looking its best.
How It Works
The eyelid hood covers around two thirds of the light source in a fixed position, so it cannot be aimed or adjusted after fitting, directing light down and forward across a step tread or path. Instead of a separate MR16 lamp, this Pure LED version uses a Cree LED chip built into the fitting, rated at 90+ CRI and 600 lumens from 6 watts. It is available with a choice of colour temperature from 2200K through to 4000K and beam angles from 15 to 60 degrees, so it can be specified fairly precisely at the point of order. The recessed body measures 63.5mm in diameter and 68.5mm in length, with a 63.5mm cut out. The visible flange is 88mm across and 7mm deep, and the eyelid adds a further 25mm of depth.
Pure LED fittings are wired in series rather than parallel, and run from a remote LED driver, sold separately, rather than a standard transformer. If you would prefer a fitting with a conventional replaceable MR16 lamp instead, the same eyelid is also available as the standard Step Light Solid Eyelid, which runs from a normal low voltage transformer.
Where It Works Best
- Recessed brick or stone steps near the coast or in exposed, salt laden air
- Fitted into retaining walls or low garden walls beside a path
- Projects where a specific colour temperature or beam angle matters, since Pure LED lets you choose both
- Larger schemes where a wired in series LED circuit suits the overall design better than individually lamped fittings
Our Own Installations
The in situ photographs on this page, showing the eyelid recessed into brick step risers, timber railway sleeper steps and curved garden walls, are Moonlight Design's own designs and installations. They are not stock imagery. They give a real sense of how this eyelid step light sits and lights a step or wall once fitted, rather than a studio shot on its own.
Good to Know
- Usually ships within 2 to 3 days. If temporarily out of stock, allow 3 to 5 weeks for a fresh batch
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging
- The Cree LED chip is built in and serviceable rather than a bulb you swap yourself, and needs a compatible LED driver, sold separately
- Dimmable if a suitable dimmable driver is used
- Solid stainless steel may pick up a light surface tarnish in some environments, regular washing keeps it looking its best
- Moonlight Design recommends installation by a registered NICEIC electrician
- Backed by Hunza's 10 year warranty on the fitting, with 5 years on the LED itself
Questions People Ask
Does this Pure LED version use a normal MR16 bulb?
No. It has a Cree LED chip built into the fitting rather than a separate replaceable lamp, and it needs an LED driver rather than a standard transformer.
Can I choose the colour temperature and beam angle?
Yes. This fitting is available in 2200K, 2700K, 3000K or 4000K colour temperatures and 15, 25, 38 or 60 degree beam angles.
Is this solid stainless steel or just a plated finish?
It is a solid casting in marine grade 316 stainless steel, not a plated coating over another metal.
What is the warranty on the LED chip compared to the fitting?
The fitting itself carries Hunza's 10 year warranty, while the LED chip is covered for 5 years.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
