Recessed square step light in solid copper with a louvred lens and an integrated Cree LED chip. Spreads a wide, even wash of light across a step tread. Needs a remote Hunza LED driver, sold separately.
Hunza Pure LED Step Light Louvre Square - Copper - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Square Step Light With the LED Built In
The Pure LED Step Light Louvre Square uses the same square flange and horizontal louvre slats as the standard Step Light Louvre Square, spreading light sideways in a wide, even wash across a step tread. The difference is what is inside it. Rather than taking a separate MR16 lamp, this version has Hunza's Pure LED chip built into the fitting itself, so there is no bulb to buy or replace like for like later on.
Solid Copper, Designed to Weather
This version is made from solid copper, one of Hunza's two solid metal finishes for this fitting. It is left unlacquered on purpose, so it will darken from a bright copper tone toward brown and eventually a green patina the longer it spends outdoors, the same way copper roofing or guttering ages. A small H mark is pressed into the face.
How It Works
- The louvre slats are fixed across the face and non adjustable, spreading light sideways rather than in a single beam.
- Recessed body 63.5mm in diameter and 68.5mm long, behind an 88mm square flange just 7mm deep, with 1m of cable supplied.
- Cut out size is 63.5mm.
- Built around a replaceable Cree LED chip rated at 600 lumens (6 watts), with a CRI of 90 or above at 3000K, wired in series with a remote Hunza LED driver, sold separately, rather than a transformer.
- Dimmable if a suitable dimmable driver is used.
- The wider Pure LED range offers a choice of colour temperature from 2200K to 4000K and beam angles from 15 to 60 degrees, so ask us if you need a specific spread or colour of light.
- Rated IP67, a step up from the IP66 of the standard version, with a 10 year warranty on the fitting and 5 years on the LED.
- If you would rather use a separate replaceable lamp, the standard low voltage and GU10 mains versions of the Step Light Louvre Square are both available in the same copper finish.
Where It Works Best
- Steps and staircases where you want a long life light source built in rather than a lamp to replace
- Low retaining walls and garden walls, to mark changes in level
- Installations where dimming is wanted alongside a fixed, even wash of light
- Anywhere the square, architectural profile suits the setting better than the round Step Light Louvre
Our Own Installations
The staircase photographs on this page are Moonlight Design's own designs and installations, not stock imagery, from gardens we have lit ourselves. We will say plainly that they show the general louvred wash effect on real stone steps rather than a close up of this specific square, copper, Pure LED fitting, since we do not yet have installation photos of the square profile on site. The wide, even light across each tread in these photos is genuinely representative of how this fitting performs.
Good to Know
- Usually ships in 2–3 days. If out of stock, allow 3–5 weeks.
- Returns accepted within 14 days if unused, uninstalled and in original packaging.
- The LED chip is built in and cannot be swapped for a different bulb, but is itself replaceable if it ever fails.
- Needs a compatible remote LED driver, sold separately, wired in series rather than a transformer.
- Solid copper will darken and patina outdoors over time. This is expected and not a fault.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
Can I use a normal MR16 bulb in this fitting?
No. The Pure LED version has a Cree LED chip built into the fitting itself, so there is no bulb to buy or replace like the standard low voltage version.
How does this compare to the round Step Light Louvre?
Both give the same wide, sideways wash of light. This square version has an 88mm square flange for a sharper, more architectural look, while the round version suits softer settings.
Is this fitting dimmable?
Yes, if it is used with a suitable dimmable driver. Without one, it will run at a fixed output.
What powers this fitting?
A remote Hunza LED driver, sold separately, wired in series. It does not use a transformer in the way the standard low voltage version does.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
