Hunza Pure LED Sign Light - Copper - Low Voltage

Copper Sign Light on a Long Adjustable Arm

The Hunza Pure LED Sign Light is made to light up signs, wall displays and building features. The head sits on the end of a 500mm arm, so the light reaches out from the wall and falls across the face of a name plate, a house number or a section of stonework. It is the low voltage version, with the LED chip built in.

Solid Copper That Weathers Beautifully

This sign light is solid copper. Hunza designs it to be left outside and allowed to patina, moving from bright, warm copper to brown and eventually a soft green over the seasons. That suits a heritage sign or a timber gate especially well. Colours are for indication only and colour swatches are available on request. If you would rather have a fixed look, 316 stainless steel and powder coated versions are also made.

How It Works

• The head rotates through 360 degrees and tilts from 0 to 90 degrees, so you can aim it precisely.
• The Cree LED chip gives 600 lumens from 6 watts, with a CRI of 90 or more at 3000K, and the parts are serviceable.
• Select 2200K, 2700K, 3000K or 4000K, a 15, 25, 38 or 60 degree beam and a clear or frosted lens.
• Head 63.5mm diameter and 75mm long, on a 38mm diameter, 500mm pole and a 78mm base 28mm deep. 1m of cable is supplied.
• Low voltage and installed in series with a remote driver, such as the Hunza 1050mA driver, sold separately.
• Dimmable if a suitable dimmable driver is used.
• Protected to IP66, with a 10 year warranty that includes 5 years on the LED.

Where It Works Best

• Shop fascias and business name signs
• House name plates and numbers on a gate pier or wall
• Wall mounted displays, murals and plaques
• Architectural features such as a stone panel or carved detail

How We Plan and Install Hunza Lighting

Over the years since 2003 we have specified, supplied and installed Hunza lighting in many gardens, and the range is one we know well. The photographs on our Design Service page show our own completed lighting schemes, and how we plan, draw up and install them with NICEIC registered electricians. Have a look if you would like help with a sign or entrance.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Must be installed in series with a remote driver, sold separately.
• Solid copper will patina outdoors. This is normal and not a fault.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

How far does the arm extend?
The pole is 500mm long and the head can rotate 360 degrees and tilt from 0 to 90 degrees.

Does it need a driver?
Yes. It is low voltage and must be installed in series with a remote driver.

Can I dim it?
Yes, if you use a suitable dimmable driver.

Will the copper change colour?
Yes. Solid copper is designed to weather and patina outdoors.

Body
Diameter: 63.5mm
Length: 75mm

Pole
Diameter: 38mm
Length: 500mm

Base
Diameter: 78mm
Depth: 28mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Sign Lite Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.