Hunza Pure LED Lawn Light Deck Mount - Solid Bronze - Low Voltage

A Deck Mount Pure LED Light With a Solid Bronze Face

The Hunza Pure LED Lawn Light Deck Mount is made to sit inside timber decking rather than turf, taking foot traffic without cracking or working loose. This version pairs a solid bronze flange with a powder coated aluminium body below the deck, and the LED is part of the fitting.

Solid Bronze Flange, Powder Coated Body

The flange is solid bronze, not plated, so it will darken and develop a natural patina outdoors over the years, which Hunza treats as part of the design rather than a fault. The body beneath it, recessed into the decking, is powder coated aluminium rather than bronze.

How It Works

• The Cree LED chip gives 600 lumens from 6 watts at 1050mA, with a CRI of 85 or more at 3000K.
• Select 15, 25, 38 or 60 degrees for the beam and 2200K, 2700K, 3000K or 4000K for the colour as part of your order.
• Recessed body 140mm in diameter and 86mm long, with a 165mm flange 10mm deep. Cut out 140mm, supplied with 1m of cable.
• A remote LED driver, sold separately, powers it, with fittings wired in series.
• Suitable dimmable drivers allow it to be dimmed.
• IP68 rated but not for use in pools or ponds. 10 year warranty, 5 years on the LED.
• A halogen Deck Mount Solid Bronze Lawn Light takes a standard MR16 lamp if you want a replaceable bulb.

Where It Works Best

Built for timber decking rather than lawn: raised terraces, decked garden paths, and anywhere people will walk directly over the fitting, where the buyer also wants the lower running cost of an integrated LED.

Our Design and Installation Service

Moonlight Design has worked with Hunza since 2003 and installs these fittings in real gardens. This deck mount Pure LED version suits a scheme that needs an integrated LED fitting recessed into decking rather than a lawn. On our Design Service page you will find photographs of our own completed schemes, with an explanation of how we plan, draw them up and install them using NICEIC registered electricians. It is a useful visit if you are lighting a deck or terrace.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Only the flange is solid bronze, and the body below the decking is powder coated aluminium.
• This is a deck fitting, so choose the standard Lawn Light if the fitting is going into turf.
• The LED chip is built in and serviceable.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is this light solid bronze all the way through?
No. The flange, the ring visible at deck level, is solid bronze. The body beneath the decking is powder coated aluminium.

Does it need a transformer?
No. A separate Hunza remote LED driver supplies the power, with the lights wired in series.

Can I walk on this fitting?
Yes. It is designed to sit flush in timber decking and take regular foot traffic.

Can I change the colour temperature later?
No. It runs from 2200K to 4000K and is set, along with the beam angle, when you order.

Is a halogen deck light available?
Yes. The Deck Mount Solid Bronze Lawn Light is built the same way but takes a separate, replaceable Hunza approved MR16 LED lamp.

Recessed body
Diameter: 140mm
Length: 86mm

Flange
Diameter: 165mm
Depth: 10mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Lawn Lite Deck Mount Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.