Hunza Pure LED Floor Light Square - Copper - Low Voltage

A Low Copper Uplighter for Patios and Paths

The Hunza Pure LED Floor Light Square is a flat, square faced uplighter in solid copper that finishes just 7mm above the surface. Its shape is made for tiled areas, and it can be stepped on without being damaged. Use it to send a clean beam up a wall, a post or a tree. The LED chip is built in, and this version runs on low voltage.

Copper, Left to Age Gracefully

Solid copper is a natural finish. Hunza designs this one to patina, so expect it to start bright and warm, then slowly turn brown and, with time, a soft green. Nothing is painted or plated on, so there is no coating to wear through. A stainless steel version is available if you want a finish that stays consistent.

How It Works

• Cree LED chip with 600 lumens from 6 watts and a CRI of 90 or more at 3000K. The parts are serviceable.
• Choose 2200K, 2700K, 3000K or 4000K, a beam of 15, 25, 38 or 60 degrees, and a clear or frosted lens.
• Body diameter 63.5mm and length 68.5mm, with a 7mm deep flange listed at 88mm. Cut out 63.5mm.
• 1m of cable is supplied. The mounting canister is not included, and you can add one here.
• Needs a remote LED driver, sold separately, because it is wired in series at low voltage.
• Dimmable with a suitable dimmable driver.
• IP67 and a 10 year warranty, with 5 years on the LED.

Where It Works Best

• On a tiled patio, close to the house wall
• At the base of a column, pergola post or garden sculpture
• Beside a path or a flight of steps
• Under a climber or a shrub that needs a little drama after dark

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. On our Design Service page you can see photographs of our own completed projects, along with how we plan each scheme, draw it up and install it with NICEIC registered electricians. Do visit if you would like a layout planned for you.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• No canister is included with this fitting.
• A remote driver is needed and is sold separately.
• Copper darkens and patinas outdoors, and this is not a fault.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

How much does it stand above the surface?
It has a low profile of 7mm.

Will it work on a driveway?
The product information only says it can be walked upon, so it is designed for foot traffic in tiled areas rather than vehicles. For drive over locations, see our flush floor lights.

Does the copper change colour?
Yes. It is solid copper, designed to weather from bright copper through brown and eventually to green.

Can I replace the LED later?
The LED chip is integrated, and Hunza describes the parts as serviceable, so the fitting does not need throwing away if the chip ever needs attention.

Body
Diameter: 63.5mm
Length: 68.5mm

Flange
Diameter: 88mm
Depth: 7mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Pure LED Floor Light Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.