Hunza Pure LED Floor Light Louvre Square - Copper - Low Voltage

Warm Copper Light Rising From the Paving

Set into a tiled terrace or paved path, this Hunza Pure LED louvre square floor light shows nothing but a neat copper frame and a pool of upward light. It is only 7mm deep, so it can be walked over safely, and the flange is cut at 45 degree angles for a crisp, tailored edge. It is a low voltage fitting with the Cree LED chip already built in, so there is no lamp to source.

Solid Copper That Weathers Naturally

This floor light is made from solid copper, left unpainted so that it can age with the weather. When new it is bright and warm. Over time it deepens to brown and then, in many gardens, to a soft green. Hunza designs it to patina, so changes in colour are expected rather than a fault. If you would rather keep one even look, the same fitting is also made in 316 stainless steel.

How It Works

• The built in Cree LED chip produces 600 lumens from 6 watts, with a CRI of 90 or more at 3000K, and the parts are serviceable.
• Order in 2200K, 2700K, 3000K or 4000K, with a 15, 25, 38 or 60 degree beam and either a clear or frosted lens.
• Body 63.5mm across and 68.5mm long, with a flange 88mm wide and 7mm deep. Cut out size 63.5mm.
• Comes with 1m of cable but no mounting canister. You can add one from the canister page.
• Wired in series on a low voltage circuit with a remote LED driver, sold separately.
• Can be dimmed if you use a suitable dimmable driver.
• IP67 rated, with a 10 year warranty and 5 years on the LED.

Where It Works Best

• In stone or tile terraces, where a copper edge adds a warm accent to the paving
• Beneath a feature wall, washing the surface with light from below
• Beside steps or at the foot of a tree trunk
• Along the edge of a lawn, to throw light up into planting

Planning Your Scheme With Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens of all sizes, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page carries photographs of our own finished schemes and explains how we plan, draw up and install them. Take a look if you would like help working out the right spacing and beam angles for your own garden.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days of delivery if unused, uninstalled and in the original packaging.
• A mounting canister is not included and is sold separately.
• Needs a remote driver, and the series circuit should be planned before installation.
• Copper will darken outdoors. This is normal and not a defect.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is this floor light made of solid copper?
Yes. The finish is solid copper, which is made to weather and patina outdoors rather than stay bright.

How deep is the flange?
The flange is 7mm deep and 88mm wide, so the fitting sits very low in the surface.

Can it be walked on?
Yes. The low profile square design is intended to be walked upon in tiled areas without being damaged.

Is a canister supplied?
No. The fitting comes with 1m of cable only, and a canister is an optional extra.

Body
Diameter: 63.5mm
Length: 68.5mm

Flange
Diameter: 88mm
Depth: 7mm
(refer to spec for more information)
Supplied with 1m cable

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.