Hunza Pure LED Euro Wall Spot - Stainless Steel - Low Voltage

A Discreet Stainless Steel Wall Spot

The Hunza Pure LED Euro Wall Spot in stainless steel is made for places where you want the light and not the fitting. A glare guard hides the LED from most viewing angles, and the adjustable arm turns through 360 degrees and tilts from 0 to 90 degrees, so you can aim it exactly where it is needed. This is the low voltage version.

316 Stainless Steel With a Steady Brushed Look

The body is 316 grade stainless steel, the marine specification Hunza uses across its solid metal range. It holds a consistent brushed appearance rather than changing colour with age. Hunza notes it can pick up a light surface tarnish in some conditions, which a wash removes.

How It Works

• The glare guard keeps the LED shielded, which suits seating areas and eye level positions where a bare lamp would distract.
• A Cree LED chip sits inside, rated at 420 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
• Choose your colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens when you order.
• Body diameter 44mm and body length 80mm, on a 60mm diameter base 15mm deep, supplied with 1m of cable.
• Low voltage and wired in series, so it needs a remote LED driver, sold separately.
• Dimmable when paired with a suitable dimmable driver.
• Weatherproof to IP66, with a 10 year warranty that covers the LED for 5 years.

Where It Works Best

• Beside outdoor seating, where a visible lamp would glare
• On walls at eye level, along a path or beside steps
• To light a feature wall, planting or sculpture from a short distance
• Anywhere the fitting itself should fade into the background

Garden Lighting Schemes by Moonlight Design

We design lighting schemes for gardens, supply Hunza fittings and install them, and we have worked with Hunza since 2003. The stainless steel Euro Wall Spot comes up on schemes where discretion matters as much as the light itself. The project photographs on our Design Service page show our own completed schemes, and explain how we plan a layout, draw it up and have it installed by NICEIC registered electricians. Take a look if you would like to see how a scheme like this comes together.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Check your colour temperature, beam angle and lens before ordering, as each is set at the point of purchase.
• The LED is integrated, and Hunza describes the parts as serviceable.
• Needs a remote LED driver, sold separately, and the circuit should be planned by your electrician.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Will the light dazzle people sitting nearby?
The glare guard shields the LED from view at typical viewing angles, so the fitting itself is much less likely to dazzle.

How far can the head be adjusted?
The arm rotates through 360 degrees and elevates from 0 to 90 degrees.

What do I need to run it?
It is low voltage and wired in series, so it needs a remote LED driver, sold separately.

Will stainless steel stay clean outdoors?
It is 316 marine grade steel, which resists corrosion well. A light surface tarnish can appear in some conditions, and washing clears it.

Body
Diameter: 44mm
Length: 80mm

Base
Diameter: 60mm
Depth: 15mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Wall Spot PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.