








Hunza Pure LED Euro Wall Spot - Copper - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Discreet Copper Wall Spot
The Hunza Pure LED Euro Wall Spot in copper has a lower profile than the standard wall spot and a glare guard that shields the LED from view at typical viewing angles. Its adjustable arm gives 360 degrees of rotation and 0 to 90 degrees of elevation, and it runs on low voltage.
Solid Copper That Weathers Naturally
This is solid copper rather than a plated finish, so it darkens outdoors over time and in some settings develops a green verdigris. Hunza designs the finish to age this way, so the change is part of its character and not a fault.
How It Works
- The glare guard helps the light be felt rather than seen, useful close to seating or at eye level.
- The Cree LED chip is rated at 420 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
- Select a colour temperature (2200K, 2700K, 3000K or 4000K), a beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens at the time of ordering.
- The body is 44mm in diameter and 80mm long, with a 60mm diameter base 15mm deep and 1m of cable.
- This low voltage fitting is wired in series and needs a remote LED driver, sold separately.
- A suitable dimmable driver makes it dimmable.
- An IP66 rating, a 10 year warranty and 5 years of cover on the LED.
Where It Works Best
- Lighting a specimen tree, sculpture or architectural detail
- Beside seating or at eye level, where the fitting would otherwise be noticed
- On garden walls and house walls where copper suits the brick or stone
- Anywhere a warm metal tone suits the planting better than steel
How We Plan and Fit Hunza Schemes
Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. The Euro Wall Spot suits a client who wants the light without seeing the fitting doing the work. Our Design Service page carries photographs of our own finished projects and shows how we plan, draw up and install a scheme with NICEIC registered electricians. If you are weighing up where a discreet wall spot might go, it is a good place to start.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- Your colour temperature, beam angle and lens are made to order specifications, so confirm them before you buy.
- The LED is built in, so there is no lamp to source, though the parts are serviceable.
- A remote LED driver is required and sold separately.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
Will the copper stay shiny?
No. Solid copper is a natural finish designed to darken outdoors, and in some settings it develops a green verdigris.
Can I aim the light where I want it?
Yes. The arm turns 360 degrees and lifts from 0 to 90 degrees.
Does it come with a driver?
No. It is low voltage and wired in series, so a remote LED driver is needed and is sold separately.
What is the glare guard for?
It shields the LED from view at typical viewing angles, which helps near seating or at eye level.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us













