Hunza Pure LED Euro Step Light - Copper - Low Voltage

Copper Step Lighting for Safe, Good Looking Steps

Good step lighting matters for safety as well as for atmosphere, and the Hunza Pure LED Euro Step Light covers both. It is designed to be recessed into masonry, stone or wood with no visible mounting screws, leaving a neat copper disc and a pool of light on the tread below. The body is extra compact, the Cree LED chip is integrated and the parts are serviceable. This version is low voltage.

Solid Copper That Weathers With the Steps

The face is solid copper, a natural finish designed to patina outdoors. New copper looks bright and warm, then slowly deepens to brown and eventually to a soft green. On old brick or weathered stone that change looks entirely at home. For an unchanging finish, choose the stainless steel step light.

Key Specification

• Recessed body of 44mm diameter and 62mm length, with a flange 69mm across and 6mm deep.
• A 44mm cut out is required, and 1m of cable is supplied.
• 420 lumens at 700mA from 4 watts, with a CRI of 90 or more at 3000K.
• Options of 2200K, 2700K, 3000K or 4000K, 15, 25, 38 or 60 degree beams, and clear or frosted lenses.
• Wired in series on a low voltage circuit, with a remote LED driver sold separately.
• Dimmable if used with a suitable dimmable driver.
• Rated IP66 and backed by a 10 year warranty, with 5 years on the LED.

Good Places to Fit It

• Along the edge of a flight of garden steps
• In a low masonry wall flanking a terrace
• Into a timber post or deck riser beside a doorway
• Beside a gate, where a small amount of light helps people find their footing

Step Lighting Planned by Moonlight Design

Our work with Hunza goes back to 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. The project photographs on our Design Service page show our own completed schemes and how we plan, draw up and install them with NICEIC registered electricians. Come and see how we approach step lighting on a real project.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Requires a 44mm cut out and a remote LED driver, sold separately.
• Over time the copper face will patina, which is expected rather than a defect.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

How deep does the hole need to be?
The recessed body is 62mm long, with a 44mm cut out and a flange 6mm deep that sits on the surface.

Will the copper stay shiny?
No. Solid copper patinas outdoors, moving from bright and warm to brown and eventually a soft green.

Can it be dimmed?
Yes, with a suitable dimmable driver.

Is it suitable for outdoor wet areas?
It is rated IP66 and carries a 10 year warranty, with 5 years on the LED.

Recessed body
Diameter: 44mm
Length: 62mm

Flange
Diameter: 69mm
Depth: 6mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Step Lite PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.