Hunza Pure LED Euro Bracket Spot - Copper - Low Voltage

A Small Copper Spot Made to Disappear

The Hunza Pure LED Euro Bracket Spot is for the places where you want the light but not the fitting. The body is only 44mm across and 80mm long, and a glare guard is built in so the beam stays out of your eyes. It can be mounted in a variety of outdoor positions, which makes it handy for picking out a tree, a wall or a planting bed. This low voltage version has an integrated Cree LED chip, and the parts are serviceable.

Solid Copper That Deepens Over Time

Solid copper is a natural finish, designed to be left outdoors and allowed to weather. It starts out bright and warm, then deepens to brown and eventually to a soft green, much like a copper roof. If you would rather have a finish that stays the same, this spot is also made in 316 stainless steel.

How It Works

• Extra compact body, 44mm in diameter and 80mm long, supplied with 1m of cable.
• Integrated Cree LED chip giving 420 lumens at 700mA from 4 watts, with a CRI of 90 or more at 3000K.
• Choose your colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens when you order.
• Low voltage and wired in series, so it needs a remote LED driver, sold separately.
• Dimmable when used with a suitable dimmable driver.
• Rated IP66 and backed by a 10 year warranty, with 5 years on the LED.

Where It Works Best

• Aimed up through the branches of a specimen tree
• Along a garden wall or fence, to bring out the texture of the surface
• Into shrubs and borders where the fitting itself should stay out of sight

Planning Your Scheme With Us

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. The project photographs on our Design Service page show our own completed schemes and how we plan, draw up and install them. Take a look there if you would like ideas for where a spot like this could go.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The LED chip is integrated and the parts are serviceable.
• Needs a remote LED driver, sold separately, and must be wired in series.
• Solid copper will darken and patina outdoors. This is normal and not a fault.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Does this spot have a glare guard?
Yes. A glare guard is built into the luminaire, so the light stays focused on what you are lighting.

Is the LED replaceable?
The fitting has an integrated Cree LED chip and Hunza states that the parts are serviceable.

Will the copper stay bright?
No. Solid copper is designed to weather outdoors, moving from bright copper to brown and eventually to a soft green.

Can I run it straight from the mains?
No. This is the low voltage version and needs a remote LED driver, sold separately.

44mm diameter, 80mm body length (refer to spec for more information) & HO7RNF 1.5mm 1m Included

• Hunza Euro Spot PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.