Hunza Pure LED Eave Light - Stainless Steel - Low Voltage

A Recessed Downlight in Marine Grade Stainless Steel

The Hunza Pure LED Eave Light in 316 marine grade stainless steel is a recessed downlight with the LED built in, built to withstand salt air and driving rain without corroding.

316 Marine Grade Stainless Steel

• The visible face is genuine solid 316 stainless steel, not a plated or coated finish.
• Stainless steel can develop a light surface tarnish in some environments. Washing occasionally with fresh water keeps it looking its best near the coast.
• The brushed finish stays consistent across multiple fittings on the same run.

How It Works

• The LED chip is a replaceable Cree unit built into the fitting, rated at 600 lumens from 6 watts, with a CRI of 90+ at 3000K.
• Colour temperature can be specified from 2200K through to 4000K, and beam angle from 15 to 60 degrees.
• The recessed body is 65mm in diameter and 65mm deep, with an 88mm diameter flange, and comes with cable fitted with Hunza's anti syphon barrier system.
• This is a low voltage fitting wired in series, needing a compatible remote driver, sold separately, rather than a transformer.
• It is IP66 rated and dimmable if a suitable dimmable driver is used.
• A square faced version of the Pure LED range exists too, and Hunza's original Eave Light with a replaceable MR16 lamp is available if you would rather change the bulb yourself.

Where It Works Best

• Coastal properties, where 316 stainless steel resists salt corrosion better than most metals.
• Eaves and soffits generally, for a hardwearing, maintenance free downlight.
• Porches, verandas, carports and covered decks where a controlled downward beam is needed outdoors.

How We Plan and Install Hunza Eave Lights

We have worked with Hunza since 2003. We design lighting schemes for gardens and the buildings around them, supply Hunza fittings and install them. Stainless steel Pure LED fittings are a regular recommendation for coastal customers who want both corrosion resistance and a maintenance free integrated LED. The project photographs on our Design Service page show our own completed schemes, and how we plan a layout, draw it up and install it with NICEIC registered electricians. Please take a look if you would like a lighting scheme planned for your property.

Good to Know

• Usually ships within 2 to 3 days. If out of stock, allow 3 to 5 weeks.
• Returns are accepted within 14 days provided the fitting is unused, uninstalled and in its original packaging.
• The LED chip is integrated and Cree branded, replaceable if it ever fails, so there is no separate lamp to buy.
• A compatible remote driver is required and is not included.
• Warranty is 10 years on the fitting and 5 years on the LED.
• Installation by a registered NICEIC electrician is what we recommend.
• Wash occasionally with fresh water in coastal or exposed locations to prevent surface tarnish.

Questions People Ask

Is this suitable for a coastal property?
Yes, 316 is the marine grade of stainless steel, well suited to salt exposed locations.

Do I need to buy a separate bulb?
No, the LED is integrated and Cree branded, so there is no separate lamp to buy.

Does this need a transformer?
It needs a compatible remote driver rather than a standard transformer, sold separately.

Is there a version with a replaceable lamp instead?
Yes, Hunza's original Eave Light in stainless steel uses a separate MR16 lamp you can change yourself.

Recessed body
Diameter: 65mm
Length: 65mm

Flange
Diameter: 88mm
(refer to spec for more information)
Supplied with cable with Hunza Anti-Syphon barrier system

• Hunza Pure LED Eave Lite Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.