Hunza Pure LED Eave Light Square - Stainless Steel - Low Voltage

A Square Recessed Downlight in Marine Grade Stainless Steel

The Hunza Pure LED Eave Light Square in 316 marine grade stainless steel combines an integrated LED with a corrosion resistant finish, built for a square soffit detail in demanding coastal conditions.

316 Marine Grade Stainless Steel

• The face you see is genuine solid 316 stainless steel, not plated or coated.
• A light surface tarnish can appear in some environments, so an occasional rinse with fresh water keeps this fitting looking good by the sea.
• Brushed metal gives a uniform look from one fitting to the next along a run.

How It Works

• A Cree LED chip is built in and can be replaced, producing 600 lumens from 6 watts at a CRI of 90 or more at 3000K.
• Colour temperatures of 2200K, 2700K, 3000K and 4000K can be ordered, with beams of 15, 25, 38 and 60 degrees.
• The body is 65mm across and 65mm deep with a 90mm square flange, and the cable arrives fitted with Hunza's anti syphon barrier system.
• It is a low voltage, series wired light that needs a compatible remote driver, sold separately.
• IP66 rated and dimmable when used with a suitable dimmable driver.
• A round faced Pure LED is also made, and so is the original Eave Light Square with a replaceable MR16 lamp.

Where It Works Best

• Coastal properties, where marine grade steel stands up to salt in the air.
• Soffits and eaves on buildings with square architectural detailing.
• Carports and covered decks where a maintenance free, corrosion resistant downlight is the priority.

How We Plan and Fit Hunza Eave Lights

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens and the buildings around them, supply Hunza fittings and install them with NICEIC registered electricians. Square stainless steel Pure LED fittings are a common specification on coastal new builds, combining corrosion resistance with a set and forget LED. Our Design Service page features photographs of our own completed schemes, and explains how we plan each layout, draw it up and install it. If a coastal or new build scheme is on your list, it is a useful place to start.

Good to Know

• Orders usually leave in 2 to 3 days; if your specification is temporarily out of stock, plan on 3 to 5 weeks.
• Unused, uninstalled fittings in their original packaging can be returned within 14 days.
• The integrated Cree LED means no separate lamp is needed.
• A compatible remote driver is not included and must be bought separately.
• The fitting is covered by a 10 year warranty, with 5 years on the LED.
• Our advice is to use a registered NICEIC electrician for installation.
• Rinse with fresh water now and then in coastal or exposed spots to avoid surface tarnish.

Questions People Ask

Is this suitable near the sea?
Yes. Marine grade 316 stainless is chosen for locations exposed to salt.

Do I need a separate lamp?
No, the Cree LED is integrated, so nothing else needs buying for the light source.

Is a transformer part of the setup?
It uses a compatible remote driver rather than a standard transformer, and the driver is sold separately.

Is there a round version of this light?
Yes, the same integrated LED mechanism is also available with a round face.

Recessed body
Diameter: 65mm
Length: 65mm

Flange
Width: 90mm
(refer to spec for more information)
Supplied with cable with Hunza Anti-Syphon barrier system

• Hunza Pure LED Eave Lite Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.