Hunza Pure LED Eave Light Square - Copper - Low Voltage

A Square Recessed Downlight in Solid Copper

The Hunza Pure LED Eave Light Square in copper pairs an integrated LED with a crisp square face, for soffits and eaves on buildings with more angular detailing.

Solid Copper Finish

• Solid copper makes up the visible face, one of Hunza's genuine solid metal finishes.
• Outdoors the copper will darken and develop a natural patina, which is normal ageing for this finish.
• Swatches are available on request, since screen colours are only ever a guide.

How It Works

• Light comes from a replaceable Cree LED chip fitted in the unit, rated at 600 lumens and 6 watts with CRI 90 or higher at 3000K.
• Specify 2200K to 4000K for colour temperature and 15 to 60 degrees for beam angle.
• Its body is 65mm wide and 65mm deep behind a 90mm flange, and Hunza supplies the cable with its anti syphon barrier system attached.
• Wired in series at low voltage, it calls for a compatible remote driver rather than a transformer. The driver is sold separately.
• The rating is IP66, and a suitable dimmable driver makes it dimmable.
• You can also choose a round faced Pure LED, or the original Eave Light Square with a replaceable MR16 lamp, if you prefer to change the bulb yourself.

Where It Works Best

• Soffits and eaves on buildings with square or angular architectural detailing.
• Entrance canopies and porches on contemporary square fronted builds.
• Carports and covered decks where a maintenance free integrated LED is worth the extra investment.

Planned and Installed by Moonlight Design

We have worked with Hunza since 2003. We design lighting schemes for real gardens and real buildings, supply Hunza fittings and install them. Square Pure LED fittings like this one tend to come up on architect led new builds, where square detailing runs through the whole exterior lighting scheme. The project photographs on our Design Service page show our own completed schemes, with an explanation of how we plan, draw up and install each layout using NICEIC registered electricians. Come and have a look if you would like square detailing carried through your whole exterior scheme.

Good to Know

• Typically ships in 2 to 3 days, or 3 to 5 weeks if the specification you choose is temporarily out of stock.
• A fitting that is unused, uninstalled and in its original packaging may be returned within 14 days.
• No separate lamp is required because the Cree LED is integrated.
• The remote driver it needs is not part of the order.
• A 10 year warranty covers the fitting and 5 years covers the LED.
• Please arrange installation by a registered NICEIC electrician.

Questions People Ask

Why choose square over round?
It is a styling choice, both use the same integrated LED mechanism, the square simply suits more angular architecture.

Do I have to buy a bulb?
No, the LED is built in, so there is no lamp to buy.

Is a transformer required?
A remote driver is needed instead of a standard transformer, and it is sold separately.

Will the copper stay bright and shiny?
No, solid copper is left unlacquered and will darken and patina naturally outdoors.

Recessed body
Diameter: 65mm
Length: 65mm

Flange
Width: 90mm
(refer to spec for more information)
Supplied with cable with Hunza Anti-Syphon barrier system

• Hunza Pure LED Eave Lite Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.