Hunza Pure LED Eave Light - Powder Coat - Low Voltage

A Recessed Downlight in Durable Powder Coat

The Hunza Pure LED Eave Light in powder coat is a recessed downlight with the LED built in, finished in a durable painted colour so it settles into an existing exterior colour scheme.

Powder Coated Aluminium Finish

• The body is aluminium finished in a durable powder coat, so colour stays consistent rather than weathering the way a natural metal would.
• Available in Hunza's standard range including black, white, grey, silver, green, brown and bronze.
• Colours are for guidance only on screen, physical swatches are available on request.

How It Works

• A replaceable Cree LED chip is built in and gives 600 lumens at 6 watts, with CRI 90 or above at 3000K.
• Pick a colour temperature between 2200K and 4000K, and a beam angle between 15 and 60 degrees.
• Dimensions are a 65mm diameter body, 65mm deep, with an 88mm flange. The cable comes attached, protected by the Hunza anti syphon barrier system.
• Wired in series on low voltage, it needs a suitable remote driver instead of a transformer, and the driver is a separate purchase.
• Rated IP66 for exterior use, and dimmable if you fit a dimmable driver.
• Hunza also makes a square faced Pure LED, and an original Eave Light with a replaceable MR16 lamp.

Where It Works Best

• Eaves and soffits where the finish needs to match existing paintwork or render.
• Porches, verandas, carports and covered decks needing a controlled downward beam outdoors.
• Entranceways where a low maintenance, integrated LED suits the brief better than a lamp you will need to replace.

Planning and Installing With Moonlight Design

Since 2003 we have worked with Hunza. We design lighting schemes for gardens and buildings, supply Hunza fittings and install them. Powder coat Pure LED fittings like this one are usually chosen when matching an existing colour scheme matters as much as having a maintenance free LED. The photographs on our Design Service page are our own completed schemes, and they show how we plan a layout, draw it up and install it with NICEIC registered electricians. Visit the page if you would like to see how eave lighting sits within a wider scheme.

Good to Know

• Dispatch is usually in 2 to 3 days, and 3 to 5 weeks if the specification you order is temporarily out of stock.
• Returns are accepted within 14 days when the fitting is unused, not installed and in its original packaging.
• The Cree LED is integrated, so there is no separate bulb to buy.
• You will need to supply a compatible remote driver, as one is not included.
• Warranty on this fitting is 5 years.
• A registered NICEIC electrician should carry out the installation.

Questions People Ask

Do I need to buy a bulb separately?
No, the Cree LED is built in, with no separate lamp to buy.

Can I match this to my existing paintwork?
Hunza's standard powder coat range covers black, white, grey, silver, green, brown and bronze, with swatches available on request.

Is a transformer needed?
A remote driver is needed rather than a standard transformer, and it is sold separately.

Is this suitable for indoor use?
No, this is an outdoor rated fitting for eaves, soffits and covered exterior spaces, not for indoor rooms.

Recessed body
Diameter: 65mm
Length: 65mm

Flange
Diameter: 88mm
(refer to spec for more information)
Supplied with cable with Hunza Anti-Syphon barrier system

• Hunza Pure LED Eave Lite Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.