Hunza Pure LED Bollard 700mm (Surface Flange Mounted) - Stainless Steel - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Stainless Bollard Fixed Down onto a Hard Surface
Where the ground is paving, decking or a solid base rather than soil, the surface flange version of the Hunza Pure LED Bollard is the one to look at. It stands 688mm tall and is fixed down through its flange, with the same twin angle reflector as the spike mounted model. Light falls onto the surface below and spreads out sideways, marking a route without glare. This is the low voltage version with an integrated Cree LED.
316 Stainless Steel with a Brushed Finish
The body is marine grade 316 stainless steel. It keeps a steady brushed finish and suits crisp, modern hard landscaping. Like any stainless steel it may develop a light surface tarnish in some settings, and a regular wash keeps that under control. Solid copper and powder coated aluminium versions are also made.
How It Works
- A mirror finish reflector directs light at two angles through a UV stable acrylic lens with an anti glare mesh.
- 170 lumens from 6 watts at 1050mA, with a CRI of 90 or more at 3000K.
- 2200K, 2700K, 3000K or 4000K can be chosen when you order.
- Diameter 63.5mm and height 688mm, supplied with 1m of cable.
- Low voltage and series wired. A remote driver, such as the Hunza 1050mA driver, is needed and sold separately.
- Dimmable when used with a suitable dimmable driver.
- IP56/IP66 rated, with a 10 year warranty and 5 years on the LED.
Where It Works Best
- On terraces and patios, where there is no soil to take a spike
- Beside steps, ramps and level changes in paved areas
- Along a paved drive or courtyard edge
- Next to a decked walkway or a garden room entrance
Seen Through Moonlight Design Projects
For over twenty years Moonlight Design has been fitting Hunza lights in real gardens, and we plan and install them ourselves. On our Design Service page you will find project photographs of our own completed schemes, along with how we plan, draw up and install them using NICEIC registered electricians. It is worth a look if you are working out how to light a paved area.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- A remote LED driver is required and sold separately. Plan the series circuit before fitting.
- The integrated LED chip is serviceable.
- Stainless steel can show a light surface tarnish in some environments. Regular washing keeps it in check.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
What is the difference between the flange and spike versions?
The flange version is fixed down to a surface and stands 688mm tall, while the spike version is pushed into the ground and stands 685mm tall.
Is it low voltage?
Yes. It is wired in series and needs a remote LED driver, sold separately.
Can I dim it?
Yes, with a suitable dimmable driver.
What is it made from?
Marine grade 316 stainless steel with a brushed finish.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
