Hunza Pure LED Bollard 700mm (Surface Flange Mounted) - Copper - Low Voltage

Warm Copper Light for Paving and Hard Standing

Fixed down by a surface flange, the Hunza Pure LED Bollard in copper brings a warm, natural look to terraces, paved paths and courtyards. It stands 688mm tall and shines light two ways from its reflector, down onto the surface and out to the sides. The low voltage Cree LED is integrated, so there is no separate lamp to buy, and the LED board is field replaceable.

Solid Copper, Allowed to Age

Nothing is plated or painted here. The body is solid copper, which starts out bright and warm and slowly browns, then picks up a soft green tone as it ages outdoors. Hunza intends it to do this and the result is a lived in look that painted metal cannot match. Prefer a stable finish? The same bollard is available in 316 stainless steel and powder coated aluminium.

How It Works

• Light goes through a UV stable acrylic lens with an anti glare mesh, from a mirror finish twin angle reflector.
• 170 lumens from 6 watts at 1050mA, CRI 90 or more at 3000K.
• Four colour temperatures to choose from: 2200K, 2700K, 3000K and 4000K.
• A 63.5mm diameter body, 688mm high, with 1m of cable.
• Wired in series at low voltage, so a remote driver, such as the Hunza 1050mA driver, is needed. Drivers are sold separately.
• You can dim it with a suitable dimmable driver.
• IP56/IP66 rated and covered by a 10 year warranty, with 5 years on the LED.

Where It Works Best

• Stone or brick paved paths in period or country settings
• Either side of garden steps and terrace edges
• Courtyards where copper will pick up the colour of the walls
• Along hard standing next to a garage or parking area

Planning Your Scheme With Us Since 2003

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page has project photographs of our own completed schemes, and describes how we plan, draw up and install them. Please take a look if you would like help with your own layout.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Needs a remote LED driver, sold separately.
• The LED chip is integrated and the parts are serviceable.
• Solid copper will darken and patina outdoors. This is normal and not a fault.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Will this copper bollard turn green?
Over time, yes. Solid copper darkens to brown and then develops a soft green patina outdoors, as Hunza intends.

How tall is the flange mounted bollard?
688mm, with a body diameter of 63.5mm.

Is the LED replaceable?
The LED chip is integrated and the parts are serviceable.

Which colour temperatures are available?
2200K, 2700K, 3000K and 4000K.

Diameter: 63.5mm
Height: 688mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Bollard 700 Pure LED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.