Hudson Valley Barkley 2 Light Wall Sconce Light - Aged Brass

Cast metal and alabaster, designed for vanity and mirror lighting

Barkley pairs two vertical alabaster cylinders with a central aged brass band, so light glows both up and down from a single wall mounted fixture. That up and down spread gives a soft, even wash of light, the kind of gentle, shadow free glow suited to a bathroom mirror or vanity area.

Aged brass finish with natural alabaster

This version is finished in aged brass, a warm, lightly burnished tone that pairs naturally with marble, warm stone and traditional sanitaryware. The two alabaster cylinders are genuine natural stone, so expect variation in colour and veining between pieces, no two will match exactly, which is part of the appeal of a real stone material rather than a defect.

How it works

Barkley takes two E27 bulbs rated up to 40W each (not supplied), one inside each alabaster cylinder, diffused for soft, indirect light rather than a harsh point source. It measures around 60cm in height and 13cm in width, projecting roughly 9.5cm from the wall. As a mains wired fitting it should be installed by a qualified electrician.

Where it works best

Barkley is designed as a bath and vanity fixture, mounted vertically either side of a mirror in a bathroom or dressing area, though it also works well in a hallway or dressing room where soft, upward and downward lighting is wanted. This fitting carries an IP20 rating, meaning it's built for indoor use in dry to occasionally damp conditions rather than direct exposure to water, so its exact position relative to a bath, shower or basin needs to respect UK bathroom zoning rules. We'd recommend having your electrician confirm the intended location falls outside a zone requiring a higher IP rating before installing near a water source.

About Hudson Valley Lighting

Hudson Valley Lighting is an American decorative lighting brand known for pairing warm brass and bronze with sculptural glass and natural alabaster. Barkley is one of several designs in the range built specifically as a vanity light, balancing that material palette with a practical, symmetrical form.

Good to know

• Made to order by Hudson Valley Lighting. Please check current lead times before ordering.
• As a made to order fitting, this piece is not eligible for return once ordered, so do check the finish, dimensions and bulb requirements first, along with its suitability for your specific bathroom zone.
• The alabaster cylinders are natural stone pieces, so expect some variation in colour and veining from the images shown.
• Takes 2 x E27 bulbs, maximum 40W each (not supplied).
• CE certified, rated IP20. Confirm the fitting's position meets UK bathroom zone requirements, and have it installed by a registered NICEIC electrician.

Questions People Ask

Does the Barkley 2 Light Wall Sconce come with bulbs?
No, bulbs are not included. It takes two E27 bulbs, each rated up to 40W, so you will need to buy these separately before fitting.

Is the aged brass Barkley suitable for use in a bathroom?
It carries an IP20 rating, which means it is designed for dry to occasionally damp indoor conditions rather than direct contact with water. It can still be used in a bathroom, but its position relative to a bath, shower or basin needs to fall outside the zones that require a higher IP rating, so ask your electrician to confirm the exact placement before installing.

Will the two alabaster cylinders match each other exactly?
No, and that is expected. Alabaster is a natural stone, so each cylinder has its own colour tone and veining, meaning the pair on your fixture will look slightly different from the images shown and from any other pair sold.

Can I fit the Barkley wall sconce myself?
No, this is a mains wired fitting and should only be installed by a qualified electrician, ideally one registered with NICEIC, so that both the wiring and the bathroom zoning are handled safely.

Can I return this fixture if it does not suit my space?
This piece is made to order by Hudson Valley Lighting, so it is not eligible for return once an order has been placed. It is worth checking the finish, dimensions and bulb requirements carefully, and confirming your bathroom zone with an electrician, before ordering.

60.33cm height x 12.7cm width x 9.53cm projection & 1.27cm height x 10.8cm width & 20.32cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.