Fabula Honeycroft Flush Wall Lamp - Graphite Black - IP54

A Modern Take on the Traditional Outdoor Lantern

Honeycroft is a flush wall lantern with a graphite black finish and a three dimensional rectangular frame holding polycarbonate panels on all four sides. The design draws from traditional oil lantern styling but works equally well in modern settings. It sits flush to the wall, making it practical for covered porches, garden walls or entrances where a projecting fitting would risk being knocked or getting in the way.

Choosing Your Finish

This piece comes in a graphite black finish that suits most exterior schemes and pairs well with both traditional period properties and contemporary houses. If black isn't quite right, the same fitting is available in other finishes across the range, giving you flexibility to match it to your architecture or existing exterior metalwork.

How It Works

A single E27 lamp holder is housed inside the protective frame, taking a bulb of up to 20W. It is wired to Class I electrical standards, meaning an earth connection is required. The IP54 rating means it is protected against low pressure jets of water from any direction, so it can handle splashing from rain and hose water without risk of damage. This makes it reliable in outdoor areas and equally suitable for bathroom use in zones 1 and 2, as long as it isn't mounted directly inside the shower enclosure. Dimmable if used with dimmable bulbs and a compatible dimmer.

Where It Works Best

Outdoors, this fitting excels at front doors, garden walls and covered patios where it gives both light and visual interest. Thanks to its IP54 rating, if you want to use it indoors it also works perfectly in bathroom zones 1 and 2, paired with a mirror or above a vanity unit. For a full explanation of bathroom zones and what each rating covers, our guide to bathroom lighting zones has the detail you need.

Design Details

The appeal lies in the geometry of the four sided frame paired with the protective lens panels. The rectangular form reads as both practical and intentional in its design, avoiding the fussiness of purely decorative lantern styling. The flush mounting means water doesn't sit on top of the fitting, which helps it weather well over time. The combination of die-cast aluminium and polycarbonate gives durability without unnecessary weight.

Good to Know

• Takes one E27 bulb, up to 20W, bulbs not included
• Dimmable if used with dimmable bulbs and a compatible dimmer
• Class I electrical rating, requires an earth connection
• IP54 rated, suitable for bathroom zones 1 and 2 if used indoors, and for outdoor use with splashing water
• Made from die-cast aluminium and polycarbonate
• Height 22cm, width 12cm, projection 12cm
• Weighs 1kg
• 2 year warranty
• Unfortunately we're unable to deliver this item to Northern Ireland, the Scottish Highlands, the Isle of Wight, Jersey or Guernsey

Questions People Ask

Can I use this in my bathroom?
Yes. The IP54 rating makes it safe for bathroom zones 1 and 2, which covers areas around the bath, sink and even in the shower room as long as it isn't mounted directly inside the shower enclosure.

Will it stand up to the weather?
Yes, it's rated IP54 which means it can handle rain and splashing water. The die-cast aluminium construction is built to weather well in outdoor conditions.

Does it come in other colours?
Yes, this design is available in other finishes across the range if you'd prefer a different colour to match your home.

Height: 22cm
Width: 12cm
Projection: 12cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.