Collingwood 1901 Rotatable Spotlight Surface Mounted - All Black

Aim it exactly where you want the light

This is the all black version of Collingwood's 1901 rotatable spotlight, a surface mounted fitting that fixes straight onto the ceiling with no cut out needed. Once it's up, the head tilts 90 degrees and rotates 360 degrees, so you can angle it onto artwork, a shelving unit, a kitchen worktop or a section of wall.

A clean matte black finish

The body and rotating head are both finished in matte black aluminium, with no visible screws or joins from the front. It sits close to the ceiling on a compact round base plate, so the fitting reads as a single, deliberate accent rather than a bulky add on.

How It Works

Each fitting is built around Collingwood's 1901 spotlight engine, rated at 9.6W. You can choose between 2700K extra warm white, 3000K warm white, 4000K cool white, or a dim to warm option that runs from 3000K down to 1800K as you lower the dimmer. Beam angle is a choice of 12, 24 or 50 degrees depending on how tight or wide you want the light to spread. A driver is supplied with the fitting and wired in via cable, matched to the dimming option you pick.

Where It Works Best

Because it can be aimed after fitting, this spotlight suits rooms where you want to pick out a specific feature rather than flood the whole ceiling with light. Living rooms and dining rooms benefit from it trained on artwork or a display shelf, kitchens can use it to light a worktop or island, and hallways, stairwells and offices can use it as a directional accent. Its IP44 rating also means it can go into a bathroom, provided it's fitted in zone 2 or beyond.

About Collingwood Lighting

Collingwood Lighting designs and manufactures its LED products from Sywell in Northamptonshire, and has specialised in LED technology since 2002. The brand says it was among the first to bring fire rated, fully waterproof and mains dimmable LED products into the UK electrical wholesale market. Collingwood has also been awarded a Gold medal by EcoVadis, placing it in the top 5% of companies assessed globally for sustainability.

Good to Know

• Matte black aluminium, surface mounted with no ceiling cut out required.
• Head tilts 90 degrees and rotates 360 degrees for aiming.
• IP44 rated, suitable for bathroom zone 2 as well as living rooms, kitchens, dining rooms, hallways, offices, stairs and commercial spaces. Read our guide to bathroom lighting zones before you buy for a bathroom.
• Comes with a 7 year warranty.
• Certified to Part B, C, E, P and L.
• Made to order, so it's non returnable.
• Moonlight Design recommends installation by a registered NICEIC electrician.

Questions People Ask

Does it need a cut out in the ceiling?
No. It's a surface mounted fitting, so it fixes straight onto a flat ceiling with no cut out needed.

How much can I adjust it once it's fitted?
The head tilts 90 degrees and rotates 360 degrees, so you can angle it at whatever you want to highlight after installation.

Can I fit this in a bathroom?
Yes. It's IP44 rated, which covers bathroom zone 2.

Which beam angle should I choose?
Pick 12 degrees for a tight, focused spot, 24 degrees for a general accent, or 50 degrees for a broader wash of light.

Is a driver included?
Yes. A driver is supplied with the fitting and wired in via cable, matched to the dimming option you choose.

What colour temperature options are there?
Choose from 2700K extra warm white, 3000K warm white, 4000K cool white, or a dim to warm option that shifts from 3000K down to 1800K.

Round ceiling base plate: 90mm diameter x 53mm high
Rotating spotlight head: 51mm diameter x 80mm long

• Collingwood 1901 Guide 2025

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.