Bover Nans Sphere PF/60 Small Outdoor Ceiling Light

A Rounded Glow for Low Ceilings

The Nans Sphere PF/60 takes the softly rounded, hand woven shade from Bover's Sphere range and turns it into a flush ceiling fitting. Bover named the Sphere family after Cala Nans, a secluded cove near Cadaques reachable only on foot or by boat, and this fitting keeps that same rounded silhouette in a compact form that sits close to the ceiling rather than hanging down.

Three Woven Finishes

It comes in three finishes. Beige gives a soft, sandy tone that blends into stone or render. Brown leans more natural, closer to woven cane or timber. Red is the boldest option, a warm terracotta shade that stands out against a pale porch ceiling. All three use the same woven synthetic fibre shade over an aluminium and stainless steel frame.

How It Works

An integrated LED light source sits inside the woven polycarbonate shade, running at 14W and 1400 lumens in a warm 2700K white with a CRI of 90, so colours underneath it look natural rather than washed out. It's compatible with triac dimming if you want to soften the light further. The fitting is rated Class I and IP54, with metalwork coated in cataphoresis and epoxy polyester paint to cope with outdoor conditions. It's supplied as a single flush ceiling fitting, 570mm high and 600mm in diameter, with a 50mm high, 120mm diameter ceiling plate.

Where It Works Best

Because it sits flush rather than dropping down, it suits porches, covered walkways and low canopies where headroom is limited and a pendant would hang too low. It gives the same soft, diffused glow as the hanging Sphere pendants, just in a fitting for spaces that need to keep clear overhead.

Made By Bover

Bover began in Barcelona in 1996, when Joana Bover sketched a design for an architect friend's project and the idea grew into a lighting brand. It's still designed and made in Spain, run out of Cardedeu near Barcelona, and known for two very different specialities, hand woven synthetic fibre pieces for outside like the Sphere range, and intricate wood lattice indoor fixtures such as the Dome family. Bover opened a US subsidiary in Atlanta in 2012 and keeps a Mediterranean sensibility running through everything it makes.

Good to Know

• Dimensions: 570mm height x 600mm diameter, ceiling plate 50mm height x 120mm diameter
• Material: Aluminium, Stainless Steel, Synthetic Fibre & Polycarbonate
• Light source: Integrated LED, 14W and 1400 lumens at 2700K, CRI 90
• Dimming: Compatible with triac dimming
• IP Rating: IP54
• Electrical Class: Class I
• Certification: CE, EAC
• Warranty: 3 years
• Made to order and therefore non returnable

Questions People Ask

Can the Nans Sphere PF/60 be used outdoors?
Yes, it's rated IP54 and built with weather resistant materials, so it's designed for covered outdoor spots like porches and walkways rather than fully exposed positions.

Is the light dimmable?
Yes, it works with triac dimming, so the light level can be lowered if you want something softer than the full 1400 lumens.

Which finish should I choose?
Beige suits pale stone or render, brown works well against natural materials like timber or cane, and red gives a bolder terracotta accent against a plain ceiling.

570mm height x 600mm diameter / Ceiling plate 50mm height x 120mm diameter

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.