Garden Lights

Garden Lights

Garden lights cover the full range of fixtures used to light planting, paths, seating areas and water features after dark, from freestanding stake and post lights to deck lights recessed into decking boards and spike lights pushed straight into borders to highlight trees and shrubs. Submersible and splashproof fittings for pond and water feature lighting sit alongside motion sensor floodlights for driveways and entrances, most running on safe low voltage systems fed from a single outdoor transformer. Styles range from discreet solar powered stake lights for wire-free installs to mains powered LED schemes designed for permanent landscaping. Whatever the size of your garden, this collection brings together the fittings needed to plan a complete, layered outdoor lighting scheme.

Filters

Sort by:

105 products

Collingwood WL220 wall light in brushed stainless steel, three quarter angle studio shot on a white background, showing the circular wall plate and the cylindrical spotlight head tilted to one side with the clear LED lens visible.Collingwood WL220 wall light in brushed stainless steel, straight on studio shot on a white background, showing the cylindrical spotlight head face on with the round wall plate behind it.
Collingwood FL02 black PIR floodlight mounted on its bracket, angled view showing the wall plate, adjustable arm and motion sensor unit below the light headCollingwood FL02 black PIR floodlight on its base plate, front on view showing the floodlight head, adjustable stem and PIR sensor housing to the side
Angled studio shot of the Collingwood 119mm tilt adjustable ground light, showing the round stainless steel bezel with two fixing screws, a recessed tinted lens, and the finned anodised aluminium body below with its cable entry point.
Round recessed ground light shot at a raised angle on a plain white studio background, showing a brushed stainless steel bezel with two countersunk fixing screws, a dark recessed well holding a tilted lens block with three small clear LED optics, and a ribbed black plastic body underneath with a side cable entry.
Studio shot on a white background of the Collingwood tilt adjustable ground light, angled to show the round 316 stainless steel bezel with its mounting screw holes, the tilted LED lens recessed inside, and the ribbed black anodised aluminium body with adjustment tab below.
Collingwood GL200 brass domed marker light viewed from above, showing the curved dome and the single facet window where light escapes in one direction.Side view of the Collingwood GL200 brass ground light body, showing the recessed cylinder, stainless steel fixing bracket and Collingwood Lighting branding engraved on the housing.
Collingwood GL016RGBW ground light in stainless steel seen from above, showing the brushed round bezel, frosted glass lens and Collingwood brandingCollingwood GL016RGBW ground light at an angle showing the recessed stainless steel body, spring loaded fixing clips and 316 stainless steel marking
Collingwood GL038 SPS ground light in antique brass, straight down view showing the round flange and central LED lensCollingwood GL038 SPS ground light in antique brass, angled view showing the recessed body, mounting bracket and Collingwood Lighting brand mark
Collingwood WL340 stainless steel step light, front on studio shot showing the brushed circular flange, embossed Collingwood logo above the lens, and the half moon frosted glass diffuser.Collingwood WL340 stainless steel step light viewed from a low angle, showing the depth of the brushed steel flange and the recessed frosted lens strip that casts the asymmetric beam.
Close up studio shot of the top of the Collingwood SL230 twin pole spike light in brushed stainless steel, the two cylindrical heads angled apart from each other on the satin post, with the polished pivot arm and the faceted lens of each head visible against a plain white background.Studio image of the stainless steel Collingwood SL230 twin pole spike light with both heads level and facing forward, showing the symmetrical crossbar mounting at the top of the brushed satin pole and a joint seam further down, on a plain white background.
Collingwood SL230 twin pole spike light in black, close studio shot on a plain white background showing the top of the pole with the two cylindrical heads staggered at slightly different heights, the left head tilted forward and the right head turned out to the side, faceted clear lenses visible in both.Cropped studio view of the black anodised aluminium head assembly on the Collingwood SL230 twin pole spike light, showing the knuckle joints where each barrel head meets the pole and the gloss black finish catching the light down the pole.
Collingwood SL220 copper LED spike light, close up studio shot of the tilted head showing the round lens and brushed copper barrel.Collingwood SL220 copper LED spike light, close up studio shot of the tilted head and lens, alternate angle view.
Collingwood UL030RGBW stainless steel spotlight, studio shot on white background, three quarter view showing the three LED emitters behind the frosted lens, ribbed brushed steel barrel and square base fixing plate with pivot bolt.Collingwood UL030RGBW stainless steel spotlight standing upright on its square fixing plate on a grey and white studio backdrop, three quarter angle with soft cast shadow, showing the knurled ribbed housing.
Collingwood 165mm Tilt Adjustable ground light in stainless steel, studio shot of the recessed fitting sitting above ground showing the round brushed stainless steel bezel with evenly spaced countersunk fixing screws, the black finned anodised aluminium body below, and the small tilt adjustment knob set into the side of the housing.
Studio product shot of the Collingwood Tilt Adjustable 193mm ground light on a plain white background, showing the round brushed stainless steel bezel with its three visible fixing screws, the dark recessed lens tilted slightly to demonstrate the adjustable beam, and the finned black anodised aluminium body below with the side mounted tilt adjustment slot visible.
Collingwood Fountain 25W submersible water feature light seen from an angle, showing the brushed stainless steel rim and the ring of LEDs behind the glass lens around the central threaded fittingUnderside of the Collingwood Fountain 25W water feature light showing the cable gland, exit cable and threaded rear housing
Collingwood GL090RGBW ground light in stainless steel, top down view showing the frosted lens and brushed steel bezel with the Collingwood name stamped into the rimCollingwood GL090RGBW ground light viewed from the side, showing the stainless steel bezel with spring clip fixings and the deep aluminium heat sink body beneath
Collingwood GL040 SPS LED ground light in antique brass, angled view showing the recessed lens and brushed brass rimCollingwood GL040 SPS LED ground light in antique brass, straight on view of the round bezel with warm white LED lit
Collingwood Halo wall light in anthracite grey, angled view showing the circular LED ring lit and the microwave sensor cutout on the side of the housingCollingwood Halo wall light in anthracite grey, side profile showing the domed lens and the illuminated halo ring around its edge
Collingwood GL200 large domed marker light in brass, low angle view showing the recessed lens facet set into the curved dome topCollingwood GL200 marker light in brass viewed from the side, showing the full cylindrical body, adjustable stainless steel mounting brackets either side and the Collingwood Lighting brand marking
Collingwood WL342 antique brass step light, angled studio shot of the square brass faceplate with bevelled edge and half moon shaped asymmetric lensCollingwood WL342 antique brass step light viewed from the side and rear, showing the round recessed body behind the faceplate and the mounting bracket with fixing screws
Collingwood WL339 stainless steel cast finish step light, front on studio shot of the round textured flange with the fixing screw and asymmetric lens slot visibleCollingwood WL339 step light at an angle, showing the recessed cylindrical body, mounting tabs either side and the glass lens strip set into the cast stainless steel flange
Angled studio shot on a plain white background of the top of the Collingwood SL230 Twin Pole, showing two brushed stainless steel cylindrical spotlight heads turned in opposite directions on a slim round stem, each with a polished bezel ring around a faceted reflector lens and a small chrome swivel knuckle at the joint.Full length studio shot on a plain white background of the complete Collingwood SL230 Twin Pole spike light, showing the two small spotlight heads at the top of a long slim brushed stainless steel pole that tapers to a sharply angled ground spike point at the bottom.
Collingwood WL075 wall light in bronze, angled studio shot on a white background showing the round wall plate embossed with the Collingwood C logo, the flared forward housing and the circular lens at its base.
Collingwood WL220 copper wall light, three quarter angle view, brushed copper cylindrical spotlight head tilted upward on its round wall plate, clear lens over the lamp visible, plain white studio background.Collingwood WL220 copper wall light, straight on view with the cylindrical head facing the camera, brushed copper finish and lamp lens visible, plain white studio background.
Collingwood FL01 black floodlight viewed from above at an angle, showing the adjustable wall mounting bracket, the rectangular LED lens with the Collingwood C logo, and the square PIR sensor unit mounted below on its own swivel joint.Collingwood FL01 black floodlight viewed face on from a lower angle, showing the flat lens front, the hinged wall bracket to the rear, and the PIR motion sensor head angled outward on its ball joint mount.
Collingwood WL340 asymmetric step light in antique brass, plan view from above showing the round brushed brass bezel and the crescent shaped lens set off centre, plain white studio background.Collingwood WL340 antique brass step light viewed from the side, showing the depth of the round housing, the frosted asymmetric lens and the stainless steel spring fixing clip used to secure it in a cut out.
Collingwood 193mm tilt adjustable RGBW ground light shown on a plain white studio background, a top down view of the round brushed 316 stainless steel bezel and the cluster of individually lensed LEDs, with the finned anodised aluminium body visible extending below.
Collingwood Tilt 165mm RGBW ground light in profile on a white studio background, showing the brushed 316 stainless steel bezel and recessed glass lens with the cluster of coloured LED emitters visible, set above the finned anodised aluminium body and side cable gland.
Collingwood Tilt Adjustable 223mm RGBW ground light in stainless steel, studio cutaway shot showing the round brushed steel bezel with countersunk fixing screws, the ring of LED chips beneath the lens, and the black finned aluminium body with a cable gland on the side.
Collingwood Tilt 147mm RGBW ground light in stainless steel, angled studio shot on a white background showing the round brushed steel bezel with four fixing screws and the central lens, above the black finned anodised aluminium body with its side mounted cable gland connector.
Collingwood GL200 4 facet brass ground light, angled view showing the domed top and two of the four light windowsCollingwood GL200 4 facet brass ground light, top down view showing all four facet windows and the stainless steel fixing tabs
Collingwood GL200 3 facet ground light in brass, angled view showing the three facet windows around the domed topCollingwood GL200 ground light body in brass, showing the stainless steel fixing brackets and Collingwood Lighting branding engraved on the housing

Illuminate your outdoor space with the range of outside garden lights available at Moonlight Design. We've handpicked the best lighting manufacturers to provide decorative and functional lighting to transform your garden into an oasis.

Transform your garden with landscape lighting.

Outdoor landscape lighting can transform an outdoor space. Use stylish lighting to create an inviting ambience in your garden. As lighting specialists, we at Moonlight Design can help you find the perfect landscape lights to complete the garden lighting vision from top light designer brands like Collingwood Lighting, Hunza Outdoor Lighting, and LuxR LED Lighting. Use outdoor garden lights to highlight design features or shrubbery to create a space where you want to relax and spend time with family and friends.

Our Garden Lighting

Create your perfect garden lighting scheme using lights from our garden lights collection. For example, use our stylish and practical step garden lights to illuminate walkways and steps. Or, use garden spotlights to cast light on design features or your shrubbery. Decorate your decking area or a wooden canopy with on-trend festoon lights to complete your garden light vision.

Power your landscape lighting.

There are various ways you can power your landscape lighting. For example, opt for solar lights or battery-powered ones, which offer ease and practicality. Solar lights will help you save money on your electricity bill while illuminating your garden beautifully. Alternatively, you can opt for energy-efficient LED garden lights, which provide bright light, using 90% less electricity than traditional bulbs.

Another popular on-trend lighting option to enhance your outdoor patio, decking or seating area is portable lamps. Our outdoor table and floor lamps are USB chargeable meaning you can move these lamps wherever you desire, creating a fluid lighting landscape. Remember to use a qualified electrician whenever you need work done on your permanently hard-wired, low-voltage or mains lighting schemes.

Visit our garden lighting hub for inspiration on how you can illuminate your outdoor space.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo