Garden Lights

Garden Lights

Garden lights cover the full range of fixtures used to light planting, paths, seating areas and water features after dark, from freestanding stake and post lights to deck lights recessed into decking boards and spike lights pushed straight into borders to highlight trees and shrubs. Submersible and splashproof fittings for pond and water feature lighting sit alongside motion sensor floodlights for driveways and entrances, most running on safe low voltage systems fed from a single outdoor transformer. Styles range from discreet solar powered stake lights for wire-free installs to mains powered LED schemes designed for permanent landscaping. Whatever the size of your garden, this collection brings together the fittings needed to plan a complete, layered outdoor lighting scheme.

Filters

Sort by:

105 products

Close up studio shot of the Collingwood SL130 spike light head on a plain white background, a dark near black cylindrical metal housing tilted forward on a slim upright stem, with the faceted clear lens and its ring bezel facing the cameraFull length side view of the Collingwood SL130 garden spike light against a plain white background, showing the small angled cylindrical head at the top, the long slender dark metal stem and the pointed spike tip at the base
Close studio shot of the Collingwood SL220 spike light head on a plain white background, a short black cylinder tilted to the right with a clear faceted lens and reflector visible in the front opening, and the top of the black stem below it.Full length studio shot of the Collingwood SL220 spike light on a plain white background, showing the black cylindrical head angled upward on a long slim ground spike that tapers to a point.
Collingwood GL019 mini LED ground light in stainless steel, angled close up of the round face showing the Collingwood logo and engraved branding around the clear lensCollingwood GL019 mini LED ground light in stainless steel, three quarter view showing the round face on top and the cylindrical 316 stainless steel body with spring clip fixing below
Collingwood Spydra spike light in black with a domed cover, plain studio render showing the full pole, ground spike and the cable connector just below the head.Collingwood Spydra spike light in black with a flat cover, plain studio render showing the full pole, ground spike and the cable connector just below the head.
Collingwood GL019 Mini LED ground light in black, angled close-up of the recessed lens showing the internal reflector and black anodised rim with the Collingwood C logoCollingwood GL019 Mini LED ground light in black, side view showing the full cylindrical housing and side fixing bracket used to secure it in the ground
Collingwood GL100 ground light in antique brass, angled studio view of the domed cap and single facet windowCollingwood GL100 ground light in antique brass, close angle on the single facet light window
Collingwood SL220 mains LED spike light in black anodised aluminium, studio shot on a plain white background showing the cylindrical head tilted forward with the recessed lens and reflector visible, and the upper section of the slim black stem below it.Collingwood SL220 black LED spike light on a plain white background, a near identical repeat of the previous studio angle, showing the tilted cylindrical head, the dark bezel ring around the lens and the narrow black stem.
Collingwood UL010 stainless steel LED spotlight, angled studio shot on a white background showing the ribbed heat sink body, clear lens and square mounting base plate with bolt fixings.Technical line drawing of the Collingwood UL010 spotlight showing its overall height, a 65mm by 65mm base footprint, and the length of the attached cable.
Collingwood GL018 C AB antique brass marker light, three quarter angle view showing the round frosted lens, engraved Collingwood branding on the rim, and the spring mounting clips on the cylindrical bodyCollingwood GL018 C AB antique brass marker light, low angle view of the brass face showing the frosted lens and Collingwood text engraved around the rim
Collingwood GL100 mini LED ground light in antique brass, showing the round dome with two facet windows facing the same directionCollingwood GL100 mini LED ground light in antique brass, angled view of the dome with two facet windows facing the same direction
Collingwood UL010 underwater spotlight in brass finish, studio shot on a white background showing the round lamp head, two hex adjuster bolts, the curved yoke bracket and the square four hole wall mounting plate.Technical line drawing of the Collingwood UL010 brass underwater light, showing a 43mm diameter lamp head, 77mm overall height, a 65 by 65mm mounting plate and the 3 metre flying lead.
Cropped studio shot of the Collingwood SL130 spike light on a plain white background, showing the bronze anodised barrel head tilted to the right on its knuckle joint, a brass toned bezel ring around a clear textured lens, and the slim stem continuing down out of the frameFull length studio shot of the bronze Collingwood SL130 spike light on a plain white background, the small barrel head angled to the right above a long slim anodised aluminium stem that tapers to a pointed ground spike
Collingwood GL016 LED ground light in stainless steel, top down view showing the brushed bezel engraved with the Collingwood name and the clear frosted lens at the centreCollingwood GL016 stainless steel ground light seen at an angle, showing the cylindrical body stamped 316 for the grade of stainless steel and the side mounted cable gland
Collingwood SL220 low voltage spike light on a plain white studio background, angled view with the matte bronze anodised cylindrical head tilted to one side, a slim amber bezel ring around the clear faceted reflector lens, and the narrow bronze stem running down towards the ground spike.Technical line drawing of the Collingwood SL220 spike light in side view, dimensioned with a 62.5mm diameter head, 440mm overall height and a 240mm spike section, alongside a boxed note reading 3m flying lead.
Collingwood GL019 Mini LED ground light in antique brass, top down view of the round recessed face plate and lensCollingwood GL019 Mini LED ground light in antique brass, angled view showing the full recessed body and cut out depth
Collingwood SL030 LED spike light photographed in full length against a plain white studio background. A polished silver stainless steel conical head is tilted forward at the top of a long slim ground spike that tapers to a sharp point, with a small hinge and collar joining the two.Close up studio shot of the Collingwood SL030 spike light head on a white background, showing the brushed stainless steel cone angled towards the camera, a ridged bezel ring holding a frosted textured lens with the single LED visible at its centre, and the swivel bracket and clamp collar that fix the head to the top of the spike.
Collingwood GL100 stainless steel ground light shown at an angle on a white background, with the Collingwood name and 316 grade marking etched into the domed housing beside the single light aperture.Close up of the Collingwood GL100's brushed stainless steel dome, showing the recessed light slot cut into one side of the housing.
Collingwood GL100 stainless steel ground light, angled top down view showing the single facet light window in the domeCollingwood GL100 stainless steel ground light, angled top down view showing the single facet light window in the dome
Collingwood UL010 universal LED light in black, plain studio product shot of the compact spotlight head on its adjustable yoke bracket and square wall mounting plate, shown at an angle with the front lens visible.Technical line drawing of the Collingwood UL010 in black, showing the round lens head, adjustable yoke bracket and square mounting plate with a 3 metre flying lead.
Collingwood GL016 LED ground light in black finish, viewed from above showing the round clear lens and flush bezel with Collingwood logo.Collingwood GL016 ground light at an angle, showing the black cylindrical body and stainless steel mounting clips used to fix it in the ground.
Collingwood GL038 stainless steel LED ground light, angled studio view showing the brushed steel bezel, engraved Collingwood branding and the recessed LED lens
Collingwood WL060 wall light in aluminium finish, angled studio shot showing the cylindrical body, round wall plate and frosted glass middle band, light switched off.Collingwood WL060 wall light in aluminium finish, front angled studio shot showing the frosted glass band and the small downward flood lens near the base, light switched off.
Collingwood GL040 stainless steel ground light, angled view showing the recessed lens, brushed steel bezel and Collingwood branding
Collingwood GL016 brass ground light, angled view showing the brushed brass bezel, frosted glass lens and Collingwood name etched into the rimCollingwood GL016 brass ground light seen from above at an angle, showing the stainless steel mounting bracket and adjustment screw on the recessed body
Collingwood GL019 LG stainless steel ground light, top down view showing the brushed bezel with Collingwood branding and honeycomb anti glare lensCollingwood GL019 LG ground light from an angle, showing the full stainless steel body depth and the side mounting clip used to secure it in the recess
Collingwood UL030 SPS stainless steel garden spotlight on a white studio background, showing the ribbed heat sink barrel, round lens face and adjustable swivel bracket bolted to a square drilled base plate.Technical dimension drawing of the Collingwood UL030 SPS spotlight, showing a 60mm diameter head, 90mm overall height, a 65mm square fixing base plate and the 3m flying lead.
Collingwood Spydra spike light in grey aluminium with a domed cover on a 300mm pole, studio image on white background showing the front elevation, spike base and cable exit with bare flying leads.Collingwood Spydra spike light in grey aluminium with a domed cover on a 300mm pole, studio image on white background from a slightly rotated angle showing the curve of the domed top.
Collingwood FL05 50W floodlight in black, angled front view showing the lit warm white LED and the detachable mounting bracket with base fixing boltCollingwood FL05 50W floodlight in black, rear angle showing the wall fixing bracket plate with mounting holes and the adjustable arm
Collingwood SL220 spike light photographed against a plain white studio background, its brushed stainless steel cylindrical head tilted forward on a slim round stem, clear faceted lens visible behind the front bezel, stem running out of the bottom of the frame.Second studio view of the Collingwood SL220 stainless steel spike light in identical framing to the first shot, showing the tilted satin steel barrel, the knurled bezel ring and the exposed lens on a white background.
Collingwood SL220 spike light in brushed stainless steel, studio shot on a plain white background. The cylindrical head is tilted forward on its polished knuckle, the clear faceted lens catching the light, with the slim spike stem running down and out of the bottom of the frame.Brushed stainless steel SL220 garden spike light against a plain white studio background, angled head shown close in so the satin grain of the cylinder, the stepped bezel and the recessed lens are all visible.
Studio shot of the Collingwood WL220 wall light in black anodised aluminium, photographed at a three quarter angle with the cylindrical head tilted forward on its circular wall backplate and the LED visible through the front lens, on a plain white background.Front on studio shot of the Collingwood WL220 wall light in black anodised aluminium, showing the circular wall backplate and the cylindrical spot head facing the camera with the LED lit behind its lens, on a plain white background.
Collingwood SL220 mains spike light in a bronze anodised finish on a plain white studio background, shown at a three quarter angle with the cylindrical head tipped forward to reveal the clear lens, the faceted reflector behind it and a slim gold toned ring, with the top of the slim round stem running down below.Bronze Collingwood SL220 spike light on plain white, framed at the same three quarter angle as the previous shot, the tilted head and the upper part of the round stem visible and the matt warm brown anodised surface catching a soft studio highlight.
Collingwood GL040 stainless steel LED ground light, top down view showing the brushed steel bezel with engraved C logo and Collingwood name around the frosted lensCollingwood GL040 stainless steel LED ground light, angled view showing the full cylindrical housing with side fixing tabs for embedding into paving or concrete
Collingwood GL016 Frosted LED ground light in stainless steel, top down studio view showing the frosted lens and Collingwood branding on the rimCollingwood GL016 ground light at an angle, showing the 316 stainless steel body, side mounting tabs and cable gland for the flying lead
Collingwood UL030 SPS black spotlight, angled studio shot showing the illuminated LED lens, 360 degree stainless steel swivel bracket and square fixing base plate.Technical line drawing of the Collingwood UL030 SPS spotlight showing a 90mm body height, 60mm head diameter, 65mm by 65mm fixing base and 3 metre flying lead.
Collingwood GL034 stainless steel hooded LED ground light, angled studio shot showing the raised visor over the lens and the Collingwood mark engraved on the outer rim

Illuminate your outdoor space with the range of outside garden lights available at Moonlight Design. We've handpicked the best lighting manufacturers to provide decorative and functional lighting to transform your garden into an oasis.

Transform your garden with landscape lighting.

Outdoor landscape lighting can transform an outdoor space. Use stylish lighting to create an inviting ambience in your garden. As lighting specialists, we at Moonlight Design can help you find the perfect landscape lights to complete the garden lighting vision from top light designer brands like Collingwood Lighting, Hunza Outdoor Lighting, and LuxR LED Lighting. Use outdoor garden lights to highlight design features or shrubbery to create a space where you want to relax and spend time with family and friends.

Our Garden Lighting

Create your perfect garden lighting scheme using lights from our garden lights collection. For example, use our stylish and practical step garden lights to illuminate walkways and steps. Or, use garden spotlights to cast light on design features or your shrubbery. Decorate your decking area or a wooden canopy with on-trend festoon lights to complete your garden light vision.

Power your landscape lighting.

There are various ways you can power your landscape lighting. For example, opt for solar lights or battery-powered ones, which offer ease and practicality. Solar lights will help you save money on your electricity bill while illuminating your garden beautifully. Alternatively, you can opt for energy-efficient LED garden lights, which provide bright light, using 90% less electricity than traditional bulbs.

Another popular on-trend lighting option to enhance your outdoor patio, decking or seating area is portable lamps. Our outdoor table and floor lamps are USB chargeable meaning you can move these lamps wherever you desire, creating a fluid lighting landscape. Remember to use a qualified electrician whenever you need work done on your permanently hard-wired, low-voltage or mains lighting schemes.

Visit our garden lighting hub for inspiration on how you can illuminate your outdoor space.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo