Garden Lights

Garden Lights

Garden lights cover the full range of fixtures used to light planting, paths, seating areas and water features after dark, from freestanding stake and post lights to deck lights recessed into decking boards and spike lights pushed straight into borders to highlight trees and shrubs. Submersible and splashproof fittings for pond and water feature lighting sit alongside motion sensor floodlights for driveways and entrances, most running on safe low voltage systems fed from a single outdoor transformer. Styles range from discreet solar powered stake lights for wire-free installs to mains powered LED schemes designed for permanent landscaping. Whatever the size of your garden, this collection brings together the fittings needed to plan a complete, layered outdoor lighting scheme.

Filters

Sort by:

105 products

Collingwood GL200 large domed marker light in brushed stainless steel, angled studio view showing the single rectangular light facet cut into the domeCollingwood GL200 large domed marker light in brushed stainless steel, close angled view of the dome and single facet aperture - view 2
Collingwood FL05 50W black cast aluminium PIR floodlight, lit, mounted on its adjustable bracket with PIR sensor unit below the light headCollingwood FL05 floodlight from the opposite angle, showing the wall mounting bracket, swivel joint and PIR motion sensor in detail
Collingwood GL100 mini LED ground light in stainless steel 316, studio shot of the domed cap showing the two angled facet cutouts and etched Collingwood 316 markingsCollingwood GL100 mini LED ground light in stainless steel 316, close view of the domed cap showing the side retaining clip and etched 316 marking on the body
Collingwood GL019 mini LED ground light in black, angled close up of the round bezel and frosted lensCollingwood GL019 ground light showing the recessed body and installation sleeve beneath the black bezel
Close studio view against plain white of the top of the Collingwood SL230 twin pole spike light in black, the two cylindrical heads turned outwards in opposite directions on a short crossbar, the left head showing a warm gold toned faceted reflector.Black SL230 twin head spike light photographed on white, upper pole only, one cylindrical head angled to the left and the other to the right, with the cooler silver faceted reflector visible in the right hand head.
Collingwood FL03 black floodlight from above at an angle, showing the tilting head, wall mounting bracket with fixing bolt, and the separate PIR motion sensor unit mounted below on its own bracketCollingwood FL03 black floodlight viewed from the side, mounted upright on its wall bracket with the PIR motion sensor fitted on a separate arm underneath the light head
Collingwood FL03 30W floodlight in black, rear three quarter view showing the detachable circular wall bracket with mounting bolt and the adjustable hinge armCollingwood FL03 30W floodlight in black, tilted upward on its wall bracket showing the front lens, reflector and Collingwood C logo
Collingwood FL10 100W colour switchable floodlight in black, three quarter view on its wall mounting bracket, tilted downward with the square base plate and pivot bolt visibleCollingwood FL10 100W colour switchable floodlight in black, angled upward view on its detachable bracket, showing the wall fixing bolt and hinge joint from below
Collingwood WL220 LED wall light in bronze, angled studio shot showing the round wall plate and the cylindrical head tilted to one side, with the LED lamp visible inside the lens.Collingwood WL220 LED wall light in bronze, front on studio shot looking directly into the lens of the tilted head, showing the anodised aluminium finish and integrated LED lamp.
Collingwood LUXI 54 rectangular terminal bollard light in anthracite grey aluminium, photographed at an angle on a white background, showing the open rectangular loop design and the solid base with cable entry points.
Top down view of the Collingwood GL019 ultra low glare LED ground light in antique brass, showing the brushed brass bezel and dark toughened glass lens with engraved C logoAngled view of the Collingwood GL019 antique brass ground light showing the full recessed body with cable gland and embossed Collingwood Lighting branding on the side
Collingwood WL041 IP fan effect wall light in anodised aluminium, angled studio view showing the disc of over a hundred radiating fins and the wall mounting plate.Front on studio view of the Collingwood WL041 IP wall light, showing the full radial pattern of aluminium fins and the small Collingwood logo badge at the centre.
Collingwood GL016 black frosted LED ground light viewed from above at an angle, showing the round frosted lens and black stainless steel surround with etched Collingwood logoSide view of the Collingwood GL016 ground light showing the black cylindrical body, mounting tabs and fixing screw beneath the frosted lens face
Collingwood SL230 twin pole spike light in bronze anodised aluminium, plain studio shot on white, viewed straight on with both cylindrical heads facing forward and level on either side of the round pole, clear lenses showing the faceted reflectors and a gold toned trim ring inside each bezel.The same bronze SL230 twin pole spike light photographed at a slight angle on a plain white background, with the two heads swivelled to different positions on their side arms to show the rotating joints, the warm brown anodised finish on the pole and a gold rimmed lens on each head.
Collingwood GL200 large domed marker LED light in polished 316 stainless steel, angled studio shot showing the three facet windows cut into the domeCollingwood GL200 domed marker light in polished stainless steel, second angled view of the faceted dome and brushed outer rim
Collingwood SL220 LED spike light in copper, angled studio shot showing the tilted lamp head and brushed copper spike on a plain white background.Collingwood SL220 LED spike light in copper, studio shot from the same angle as the previous image showing the tilted head and spike on a plain white background.
Collingwood FL02 20W colour switchable floodlight in black, shown from above at an angle with the detachable first fix wall bracket separated from the fittingCollingwood FL02 20W colour switchable floodlight in black, shown from a lower angle with the tilting bracket and mounting plate visible beneath the fitting
Front on view of the Collingwood GL019 mini LED ground light in brushed stainless steel, showing the engraved C logo and recessed bronze tinted lens.
Top view of the Collingwood GL040 ground light in antique brass, showing the round brushed brass face, dark tinted lens and the Collingwood logo.Angled view of the Collingwood GL040 ground light body in antique brass, showing the cylindrical recessed housing and stainless steel mounting clip with fixing screws.
Collingwood WL342 brushed stainless steel step light, angled studio shot showing the square bevelled flange and the recessed shell shaped asymmetric lens with the Collingwood logo mark above itCollingwood WL342 brushed stainless steel step light viewed from above at a low angle, showing the flush square flange profile and the pale glass asymmetric lens set into the brushed steel face
Collingwood GL016 Square Ground Light in stainless steel, angled overhead view showing the flat square walk over face with the recessed ribbed lens at its centreCollingwood GL016 Square Ground Light in stainless steel, side angle view showing the square bezel, mounting clips and the cylindrical 316 stainless steel body beneath
Collingwood SL230 twin pole spike light in bronze anodised aluminium, plain white studio shot of the upper pole with both cylindrical heads set level and splayed outwards, showing the faceted clear lenses and gold toned bezel ringsBronze SL230 twin spike light on a plain white background with the two heads turned to different angles, the left head tilted upward and the right rotated towards the camera, showing the swivel joint where each head meets the crossbar
Collingwood GL100 1W Mini LED Ground Light in antique brass, angled studio view showing the domed facet cover and one of the four light aperturesCollingwood GL100 1W Mini LED Ground Light in antique brass, second angled studio view of the domed facet cover and recessed lens
Collingwood BL03 wooden LED bollard shown in three finishes side by side, from left to right a dark reddish brown wood with a rounded domed head, a pale blond wood with a square flat cut head, and a mid brown wood with an angled chamfered head, each with the LED recessed into the neck of the fitting
Collingwood Tilt Adjustable 147mm ground light in stainless steel, studio shot at an angle showing the round brushed bezel with recessed fixing screws on top and the finned black anodised aluminium body with the tilt adjustment knob below.
Collingwood GL200 domed marker light in brushed stainless steel 316, viewed from above showing the recessed LED window set into the sloped edge of the dome.Close angled view of the stainless steel GL200 marker light, showing the low profile dome and the linear lens on its sloped edge.
Collingwood GL200 large domed marker LED ground light in polished 316 stainless steel, 4 facet version, angled studio shot showing the brushed dome and one clear lens windowCollingwood GL200 large domed marker LED ground light in polished 316 stainless steel, 4 facet version, close angled view of the dome and lens window against a white background
Collingwood GL100 mini LED ground light in antique brass, angled view of the low domed fitting showing the single visible light window recessed into the brushed brass surfaceAntique brass Collingwood GL100 ground light seen from a slightly different angle, showing the smooth domed top and the off centre light aperture with its dark toughened lens
Collingwood FL01 black floodlight shown from above, with the round wall mounting plate and pivot bolt on its adjustable bracket arm.Collingwood FL01 black floodlight angled upward on its adjustable bracket, showing the wall mounting plate and pivot bolt at the base.
Collingwood GL100 four facet mini ground light in stainless steel 316, viewed from above showing the brushed dome top and one of the four milled facet channels.Close up of the Collingwood GL100 ground light's stainless steel dome and facet channel, showing the dark rubber seal recessed into the housing.
Collingwood GL200 large domed marker LED light in antique brass, studio shot showing the two facet windows facing one direction and the stainless steel mounting clips on the side of the bodyCollingwood GL200 brass marker light installed flush in a textured stone paved surface at night, warm white light grazing across the ground from the two facet openings
Collingwood GL050 stainless steel ground light seen from directly above, showing the brushed metal bezel and frosted glass lens with Collingwood branding etched into the rimCollingwood GL050 stainless steel ground light at an angle, showing the cylindrical body, spring mounting clips and set screw used to secure it in the ground
Collingwood UL030 SPS spotlight in brass, angled studio shot on a white background showing the square four hole base plate, the adjustable stainless steel yoke with brass locking bolt, and the clear front lens over the built in LED.Technical line drawing of the Collingwood UL030 SPS spotlight showing a 60mm head diameter, 90mm overall height, a 65mm by 65mm base plate, and the 3 metre flying lead.
Collingwood GL200 large domed marker LED light in stainless steel, angled view showing the two facing lit windows and brushed circular topCollingwood GL200 stainless steel domed marker light, three quarter view of the low profile disc body designed to sit flush in paving or decking
Collingwood GL100 mini LED ground light in antique brass, angled view showing the domed housing with two of its three angled facet openings and dark lensed light windows.Collingwood GL100 antique brass ground light, close angled view of the flush domed brass housing and facet cutouts that spread light sideways across the ground.
Collingwood BL01 wooden LED bollards shown in three timber and top options: a dark Sapele finish with a domed top, a pale Oak finish with a flat chamfered top, and a medium Iroko finish with a pointed top, each with the angled light head near the top and cable entry holes visible at the base.

Illuminate your outdoor space with the range of outside garden lights available at Moonlight Design. We've handpicked the best lighting manufacturers to provide decorative and functional lighting to transform your garden into an oasis.

Transform your garden with landscape lighting.

Outdoor landscape lighting can transform an outdoor space. Use stylish lighting to create an inviting ambience in your garden. As lighting specialists, we at Moonlight Design can help you find the perfect landscape lights to complete the garden lighting vision from top light designer brands like Collingwood Lighting, Hunza Outdoor Lighting, and LuxR LED Lighting. Use outdoor garden lights to highlight design features or shrubbery to create a space where you want to relax and spend time with family and friends.

Our Garden Lighting

Create your perfect garden lighting scheme using lights from our garden lights collection. For example, use our stylish and practical step garden lights to illuminate walkways and steps. Or, use garden spotlights to cast light on design features or your shrubbery. Decorate your decking area or a wooden canopy with on-trend festoon lights to complete your garden light vision.

Power your landscape lighting.

There are various ways you can power your landscape lighting. For example, opt for solar lights or battery-powered ones, which offer ease and practicality. Solar lights will help you save money on your electricity bill while illuminating your garden beautifully. Alternatively, you can opt for energy-efficient LED garden lights, which provide bright light, using 90% less electricity than traditional bulbs.

Another popular on-trend lighting option to enhance your outdoor patio, decking or seating area is portable lamps. Our outdoor table and floor lamps are USB chargeable meaning you can move these lamps wherever you desire, creating a fluid lighting landscape. Remember to use a qualified electrician whenever you need work done on your permanently hard-wired, low-voltage or mains lighting schemes.

Visit our garden lighting hub for inspiration on how you can illuminate your outdoor space.

We're Proud To Offer

Collingwood Lighting logoHunza Lighting logoOrluna logoSchwung logoBuster + Punch logo