Steinel XLED home 2 S Silver - Sensor-Switched LED Floodlight

A Silver Sensor Floodlight for Driveways and Entrances

The Steinel XLED Home 2 S in silver is a wall mounted outdoor LED floodlight with a built in motion sensor. It switches on when someone approaches and off again after a time you set. It gives 1550 lumens from just 13.7W, and the sensor covers 180 degrees with a reach of 10 metres. That makes it a practical LED security light for a driveway, side passage, courtyard or garden wall.

Silver Finish with a Swivelling Panel

This version has a silver housing and a flat opal cover over the LED panel, which gives it a clean, stainless steel look against brick, render or cladding. The panel swivels on its bracket so you can aim the light where you want it, and the sensor head below swivels separately, 180 degrees horizontally and 90 degrees vertically. A magnesium composite body, which Steinel calls HCMC, draws heat away from the LEDs.

How It Works

A passive infrared sensor picks up movement and switches the light on. You set the time it stays on, from 8 seconds up to 35 minutes, and the twilight level it works at, from 2 to 2000 lux, using the dials on the unit. The sensor works best at a mounting height of 1.8 to 4 metres, with 2 metres ideal. The LED is an integrated Steinel system at 3000K warm white with a CRI of 80 to 89. It runs from a 220 to 240V mains supply and is a Class II fitting. We always recommend a qualified electrician installs this fitting.

Where It Works Best

Steinel suggests it for all round the building: front and rear doors, a driveway, a courtyard, a terrace or balcony. It fits on a wall or corner with surface wiring, and it is rated IP44, so it is protected against splashing water from any direction.

About Steinel

Steinel is a German sensor lighting brand, founded in 1959. The company says it introduced the world's first sensor switched light in 1987, and has registered more than 300 patents, utility models and designs since it began. Its products are sold in over 80 countries.

Good to Know

• Integrated LED, 13.7W, 1550 lumens, 3000K warm white.
• 180 degree passive infrared sensor with a reach of 10 metres.
• Rated IP44 and Class II, for outdoor use.
• Size: 161mm wide x 180mm high x 218mm deep.
• We always recommend a qualified electrician installs this fitting.
• Comes with a 5 year manufacturer warranty.
• You can return this item within 14 days of delivery, provided it is unused, uninstalled and in its original packaging. See our returns policy for full details

Questions People Ask

Does the XLED Home 2 S switch on by itself? Yes. Its infrared sensor detects movement within a 180 degree area and a reach of 10 metres, and switches the light on automatically.

How long does the light stay on? You choose. The on time can be set anywhere from 8 seconds to 35 minutes using the controls on the unit.

Can I stop it coming on in daylight? Yes. A twilight control sets the brightness level the light responds to, from 2 to 2000 lux.

How high should I mount it? The sensor works at a mounting height of 1.8 to 4 metres, and Steinel gives 2 metres as the ideal height.

Who should install this light? We always recommend a qualified electrician installs this fitting.

Can I return it? Yes. You can return this item within 14 days of delivery, provided it is unused, uninstalled and in its original packaging. See our returns policy for full details.

161 x 180 x 218 mm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.