






SLV Big Theo Outdoor Beam Up/Flood Down LED Wall Light - Anthracite - Mains

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
5 years Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
One Sharp Beam, One Soft Flood, Same Fixture
This is the most theatrical member of the Big Theo family. Rather than two matching cones, it pairs a narrow, almost architectural beam thrown upward with a broad, gentle flood cast down, so the same fixture reads as a highlight and a wash at once.
Choosing Your Finish
This LED version is available in anthracite, a deep charcoal that keeps the fixture itself understated so the contrast between the tight beam and the wide flood does the visual work. If you would rather have two equal cones instead of one narrow and one wide, the Big Theo Flood Up/Down LED Wall Light uses the same integrated LED engine in a symmetrical pattern, and pairs neatly with the anthracite Big Theo Ceiling Light if you are lighting a porch as well as a wall.
How It Works
Two integrated LEDs are built into the housing with a driver wired for direct connection to 230 to 240V mains, so there is no separate lamp to source or replace. The upper LED throws a tight 2 degree beam, while the lower LED spreads a much wider 24 degree flood, together drawing 29W and producing 2130 lumens at a warm 3000K colour temperature (CRI80). SLV rates the LEDs for around 25,000 hours of use. The aluminium and glass housing carries an IP44 rating and IK02 impact resistance for exposed outdoor walls.
Where It Works Best
Choose this one where you want a lighting effect as much as illumination, either side of a feature door, along a rendered gable end, or anywhere the contrast between a sharp upward beam and a soft downward flood will read as intentional. It suits contemporary facades more than traditional ones, where the visual drama of the two different cones can stand out.
Good To Know
- Aluminium body with glass covers, finished in anthracite
- Integrated LED engine, 29W, 2130 lumens, 3000K warm white, CRI80
- Upper beam angle 2 degrees, lower flood angle 24 degrees
- Rated average lifespan around 25,000 hours; LEDs are built in and not user replaceable
- IP44 rated with IK02 impact resistance
- Wired for direct connection to a 230 to 240V mains supply via the built in driver
- Dimensions approximately 130 x 290 x 135mm, weight around 2.45kg
- Backed by SLV's 5 year manufacturer warranty
- Wipe clean with a soft, dry cloth; avoid abrasive cleaners
- Mains wiring should always be installed by a registered electrician
Questions People Ask
Will I ever need to replace the LEDs? The two LEDs are built into the fixture and rated for around 25,000 hours of use, so under normal use you should not need to think about replacing them.
What is actually different between the beam and the flood? The upper LED throws a tight 2 degree beam upward while the lower LED spreads a much wider 24 degree flood downward, giving a sharp highlight above and a soft wash below from the same fixture.
Is the light warm or cool in tone? It is a warm 3000K white with a CRI of 80, giving a soft welcoming glow rather than a stark white light.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us

