Orluna M-700 Mains Dimmable Driver - 700mA 10W

Orluna M-700 Mains Dimmable Driver

The Orluna M-700 is a 700mA constant current driver built for mains dimming, giving specifiers a straightforward way to control light output on a compatible Orluna fitting from a standard wall dimmer.

Matching This Driver To Your Fitting

Before specifying, confirm that the Orluna fitting's LED engine is rated to run on a 700mA constant current supply, since driver and fitting current must match for correct, stable operation. For dimming, this driver works with standard leading and trailing edge dimmer switches, so check the dimmer's minimum and maximum load against the fitting's wattage to avoid flicker or premature switching off at low dim levels. If in doubt, ask your Orluna supplier or electrician to confirm the pairing before installation.

How It Works

The M-700 takes a mains input and steps it down to a regulated 700mA constant current output, rated at up to 10W. Dimming is handled on the mains side using a compatible leading or trailing edge dimmer switch, so the fitting dims exactly as a mains dimmable circuit would.

Where It Works Best

At 700mA, the M-700 sits at the higher current end of Orluna's mains dimmable range, suited to fittings whose LED engine is specified to run at this current rather than the lower 120mA of the M-120. As with any driver, keep it in an accessible location such as a ceiling void so it can be reached for maintenance or replacement.

Made By Orluna

Orluna was founded in 1973 by a group of aeronautical engineers who first applied LED technology to civil and military applications, at a time when LEDs were rarely used in architectural lighting at all. That background in precision engineering carried through into the company's later move into high end architectural fittings, and it still shapes how Orluna designs the control gear that powers its own products, including drivers like the M-700.

Good To Know

• Constant current output: 700mA
• Maximum power: 10W
• Input: Mains voltage
• Dimming: Compatible with standard leading and trailing edge dimmer switches
• Suitable for use with Orluna fittings rated to the same current
• Covered under Orluna's 20 year spares and repair programme as a replaceable component

Questions People Ask

Can the M-700 be used with any dimmer switch? It is designed to work with standard leading and trailing edge dimmer switches, though it is worth checking the specific dimmer's compatibility list and load range before installation.

What happens if I use it with a fitting rated for a different current? The fitting's LED engine needs to be rated for 700mA to operate correctly, so always match the driver current to the fitting rather than mixing current ratings.

Can this driver be used outside the Orluna range? It is intended for use with Orluna fittings, so pairing it with third party fixtures is not something Orluna specifies or supports.

119mm length x 53mm width x 25mm depth

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.