Orluna Fade Twin Adjustable Architectural Downlight - Trimless Low Glare

Two Points of Light From One Ceiling Line

Fade Twin Adjustable takes Orluna's low glare, trimless downlight and gives it two independently adjustable heads within a single plaster in plate. Rather than cutting two separate holes for two light points, one 89mm cut out does the job, keeping the ceiling plane cleaner while still letting you aim each head where it's needed.

Choosing Your Configuration

Fade Twin Adjustable has the widest choice of engines and beams in the Fade range, reflecting how often it's used to solve two different lighting jobs from one fitting.

• Driver: 0 to 10V Dimming, Dali, Mains Dimming or Non Dimming.
• Engine: Origin (General Use) for everyday ambient light, Origin Natural (Highest Quality) for the most accurate colour rendering, Origin Warm Dim (1800K to 3000K) if you want the light to warm as it dims, similar to halogen, or Origin loPro for installations where the ceiling void is too shallow for a standard engine.
• Colour temperature: 2700K, 3000K, or the full 1800K to 3000K warm dim range if the Warm Dim engine is selected.
• Beam angle: an unusually broad spread from tight 18° to 20° accents through mid range options around 26° to 33°, up to wide 41° to 57° washes, so each of the two heads can be set differently if the application calls for it.
• IP rating: IP54 for dry interiors, IP65 for locations with occasional moisture.

Standard finish is a white RAL 9010 bezel with a black baffle. Talk to Orluna directly if you need a configuration outside this list.

How It Works

Each head sits behind its own deep set low glare baffle, extended forward to the face of the fitting so the LED source stays out of view and halo effects around the aperture are minimised. The plaster in plate finishes flush with the ceiling, leaving only the 80mm bezels visible around the shared 89mm cut out. Both heads adjust independently, so they can be aimed at two different targets, or angled apart to widen coverage, while a shared aluminium body manages heat across both LED engines to protect colour output over time.

Where It Works Best

Twin Adjustable earns its place wherever a single ceiling cut out needs to do double duty: over a kitchen island where one head can wash the worktop and the other lights the space above it, in a hallway where light needs to run in two directions from a central point, or in retail settings where two products need separate accents from one fitting position. That two head layout is what separates it from the single head Fade Fixed and Fade Adjustable models, which are the better choice where only one beam is needed per ceiling point.

Made By Orluna

Orluna was established in 1973 by aeronautical engineers who brought early LED technology into civil and military use, an unusual pedigree for a lighting brand that still informs how precisely its fittings are engineered today. Andrew Kilborn took ownership in 2009 and moved the company firmly into architectural lighting, with families such as Quad 50, Cero, Curve, Origin, Fade and Vio following. Much of Orluna's engineering, including the modular approach behind Fade Twin Adjustable, is designed so bezels, reflectors and engines can be replaced individually rather than the fitting being scrapped, underpinning its 20 year spares, repair and reuse programme.

Good To Know

• 80mm bezel, 89mm cut out
• Two independently adjustable heads from a single cut out
• White RAL 9010 bezel finish with black baffle
• IP54 or IP65 depending on configuration
• Origin loPro engine option for shallow ceiling voids
• Aluminium construction for heat management
• Covered by Orluna's 20 year spares, repair and reuse programme
• Made to order and non-refundable
• Moonlight Design recommends installation by a registered NICEIC electrician

Questions People Ask

• Can the two heads be set to different beam angles? Yes, each head is specified and adjusted independently, so you can combine a narrow accent beam with a wider wash from the same fitting.
• What is Origin loPro for? It's Orluna's engine option for installations where the ceiling void is too shallow to accommodate a standard engine depth.
• Does this fitting suit a low ceiling void? With the Origin loPro engine selected, yes, this is specifically what that option is designed for.

Bezels 80mm diameter (refer to spec for details)

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.