Orluna Camber Twin Adjustable Curved Downlight - Trimless All Purpose Use

Camber Twin Adjustable: Two Aimed Beams, One Ceiling Aperture

Where a single beam isn't enough, Camber Twin Adjustable sets two independently adjustable engines into one trimless, curved fitting, letting a single ceiling aperture do the work of two separate downlights.

Choosing Your Configuration

This fitting carries the broadest configuration range in the Camber collection.

• Driver: 0 to 10V dimming, Dali, mains dimming or non dimming.
• Engine: Origin for general everyday lighting; Origin Natural, Orluna's highest quality option for accurate colour rendering; Origin Warm Dim, which lowers in colour temperature from 3000K down to 1800K as it dims, mimicking the warm dimming curve of a halogen or incandescent lamp, useful for hospitality and residential mood lighting; or Origin loPro, sized for installations with a limited ceiling void.
• Lamp temperature: fixed 2700K or 3000K white, or the 1800K to 3000K Warm Dim range where the Warm Dim engine is specified.
• Beam: from tight 18° accents up to broad 54° and 55° washes, the widest spread in the Camber range, so the two heads can be set to different angles if the application calls for it.
• IP rating: IP54 for standard dry interiors, IP65 where moisture or dust protection is needed.

How It Works

Camber Twin Adjustable houses two separately adjustable engines within a single trimless curved bezel and 89mm cut out, each tilting up to 28 degrees and rotating independently within the fitting. Aluminium heat sinking manages thermal load from both engines, maintaining colour consistency and output life in the same way as the rest of the Camber range.

Where It Works Best

Because it delivers two aimable beams from a single ceiling penetration, Twin Adjustable suits spaces where ceiling real estate is limited but two functions are needed from the same spot, washing a wall while downlighting a worktop below it, or covering two adjacent zones from a single structural bay. It sits above the single head Camber Adjustable in scale and output potential, and unlike Camber Fixed, both of its engines can be redirected after installation.

Made By Orluna

Orluna builds its fittings, including the twin engine housing in this product, from die cast and machined aluminium, chosen because it draws heat efficiently away from the LEDs and keeps the housing rigid over decades of use. Engines, bezels and drivers are individually replaceable rather than fixed for the life of the fitting, the same modular thinking that underpins Orluna's 20 year spares, repair and reuse programme, under which fittings can be returned, dismantled, renewed and tested rather than scrapped.

Good To Know

• 80mm bezels (two per fitting), 89mm cut out
• White RAL 9010 bezel with black baffle
• 28 degree tilt on each engine
• IP54 or IP65 available
• Origin Warm Dim engine available, 1800K to 3000K
• Origin loPro engine available for low ceiling voids
• Backed by Orluna's 20 year spares, repair and reuse programme
• Made to order, so orders cannot be cancelled or refunded once placed
• Moonlight Design recommends installation by a registered NICEIC electrician

Questions People Ask

Can each engine in Camber Twin Adjustable be aimed separately? Yes, both engines tilt and rotate independently within the shared bezel.

Is there an option for shallow ceiling voids? Yes, the Origin loPro engine is sized for low void installations.

Is Camber Twin Adjustable suitable for wet areas? Specified with the IP65 option, yes.

Bezels 80mm diameter (refer to spec for details)

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.