LuxR Modux 2 Pond Light (Weighted Base) with 12V Integral Driver - Copper - Low Voltage
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Weighted Copper Pond Light With a 12V Integral Driver
The LuxR Modux 2 Pond Light has a weighted base, so it sits where you place it in the water. It is submersible to 9m and comes with a 12V integral driver and 3m of cable. Copper suits a pond edge where a warm tone and a slowly aging finish are welcome.
Copper That Weathers Naturally
This version is precision machined from copper. It starts out bright and warm, then slowly develops a soft natural patina outdoors, so each fitting gradually takes on its own character. The light source is a 2 watt Cree LED with a CRI of 90 plus.
Choose Your Options
- Colour temperature: 2200K is a very warm glow, 2700K and 3000K are warm white, and 4000K is a crisper neutral white.
- Beam: 26º is the narrowest, 36º is a medium beam and 74º is the widest, for more spread.
- Lens: clear gives the sharpest beam, while frosted softens the edges of the light.
How It Works
The 12V integral driver is built into the fitting, so you do not need a separate constant current driver. It must be installed in parallel with a remote transformer, which is sold separately. It is dimmable when paired with a suitable dimmable transformer. The Cree LED can be replaced or swapped for a colour LED, and the optic can be changed to alter the beam width.
Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.
Where It Works Best
This is a good choice for ponds, water features and shallow pools where the fitting can sit under the surface and light plants, rocks or a fountain. The copper will age naturally around the water. It is also available in the M1 and the larger M4.
Good to Know
- Dimensions: body 41mm diameter and 65mm long. Supplied with 3m of H05RN-F cable.
- Rated IP68 and submersible up to 9m.
- Material: copper and bronze.
- 2 watt LED at 85 lumens per watt, CRI 90 plus, low voltage with a 12V integral driver, parallel wiring.
- Warranty: 10 years on the body, with 5 years on the LED.
- Made in New Zealand by the makers of Hunza.
Questions People Ask
Do I need a separate driver for the pond light?
No. It has a 12V integral driver built in. It must be installed in parallel with a remote transformer, which is sold separately. We recommend a registered NICEIC electrician installs it.
How deep can it go?
It is IP68 rated and submersible up to 9m.
Which beam angle should I choose?
Choose 26º for a tight beam on a single plant or rock, 36º for a medium beam, and 74º for a wide spread across a larger area.
Can I dim it?
Yes, when it is used with a suitable dimmable transformer.
Will the copper change colour in water?
Copper develops a natural patina over time, so the finish softens and darkens gradually. This is normal and part of its appeal.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us
Recommended Accessories
