Leverint Temple Flush Fitting

A Low Glass Drum with a Sunburst of Ribs

The Temple Flush Mount is a low, round fitting with a hand blown glass shade, 200mm across and 100mm deep, so it sits close to the surface rather than hanging down into the room. The ribs on the front fan out from a small round fixing at the centre, and two candle bulbs sit inside, glowing through the glass. Leverint lists it as both a wall light and a flush mount, designed for hallways, kitchens and other living areas.

Choose Your Finish

Each Temple Flush Mount is made to order in your choice of hand blown glass and plated metal finish, chosen from the swatches and dropdowns above when you order. The photos show it in ribbed, fine ribbed and transparent black glass, and Leverint also offers opaque white. The metalwork is plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel, so you can match the fitting to the rest of your scheme. Because the glass is blown by hand and the metal is plated by hand, the colour and texture of your light may vary slightly from the photos, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.

How It Works

It takes two E14 candle bulbs, which are not included as standard, but you can add Leverint's LED candle bulb from the dropdown above or choose no bulb and supply your own. Leverint lists a maximum of 8W LED and a supply of 220 to 240V, and the fitting is mains dimmable. It is a hardwired fitting, so we recommend that a qualified electrician installs it, ideally one who is NICEIC registered.

Leverint confirms this light is rated IP44, so it is suitable for bathroom use. Our guide to bathroom lighting zones explains what is allowed where.

Where It Works Best

The shallow 100mm depth makes it a good choice where a pendant would hang too low, such as a hallway, a kitchen or a living area. A pair looks neat either side of a round mirror, as in one of the photos, and a single fitting suits a landing or a narrow corridor where headroom matters.

Made By Leverint

Leverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons, and its founders bring decades of lighting design and glass artistry to every light. A drum with ribbing on both the face and the sides is a good example of the detail that hand blowing allows.

Good to Know

• Handmade to order by Leverint in the UK; Leverint quotes approximately 5 to 6 weeks, so please check the current lead time before ordering
• As a made to order light, it cannot be returned unless it arrives faulty
• 200mm diameter and 100mm deep; weighs approximately 1kg
• Takes 2 x E14 candle bulbs, 8W LED maximum; no bulb as standard, with Leverint's LED candle bulb available from the dropdown above
• Rated IP44, so it is suitable for bathroom use
• Mains dimmable when used with compatible dimmer and bulbs
• Hand blown glass and hand plated metal, so colour and texture may vary slightly from the photos
• CE and UKCA marked; 2 year warranty
• Polish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the light
• We recommend installation by a qualified electrician, ideally NICEIC registered

Questions People Ask

What glass and metal finishes can I choose?

The glass comes in ribbed, fine ribbed, transparent black or opaque white. The metalwork can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Pick your combination from the swatches on this page when you order.

Does the Temple Flush Mount come with bulbs?

Not as standard. It takes two E14 candle bulbs, and you can add Leverint's LED candle bulb from the bulb dropdown when you order, or choose no bulb and fit your own LED candle bulbs, up to 8W LED as listed by Leverint.

Is the Temple Flush Mount dimmable?

Yes, it is mains dimmable, provided it is used with a compatible dimmer switch and bulbs.

Can I use the Temple Flush Mount in a bathroom?

Yes. Leverint confirms this light is rated IP44, so it is suitable for bathroom use. Please check our guide to bathroom lighting zones for where it can go, and have it installed by a qualified electrician.

Should an electrician install it?

Yes, we recommend that a qualified electrician installs it, ideally one who is NICEIC registered, because it is a hardwired mains fitting.

How big is the Temple Flush Mount?

The glass drum measures 200mm in diameter and 100mm in depth, and the fitting weighs approximately 1kg.

How long does it take, and can I return it?

Each Temple Flush Mount is handmade to order by Leverint in the UK, with a lead time of approximately 5 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.

Diameter: 20cm
Depth: 10cm

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.