Leverint Queensway Table Lamp - Base Only

A Sculptural Stack of Hand Blown Glass

The Queensway Table Lamp is built from three rounded glass sections stacked into one tall column, with a pinched ring between each section. A slim metal stem runs up through the centre of the glass to the lamp holder, and the whole column stands on a small plated metal disc. It is a sculptural shape, hand blown in Leverint's London studio, that suits a console table, an office desk or a bedside table. It stands 450mm high before a shade is added, so it is a tall lamp, and the fabric shade shown in the photos is not included, so you can pair the base with a shade of your own choosing.

Choose Your Glass and Metal Finish

Each lamp is made to order in your choice of hand blown glass and plated metal finish, chosen from the swatches above when you order. The glass comes in ribbed or fine ribbed, and the photos show the fine ribbed version, where narrow vertical ribs run down each rounded section. The photos show the lamp on one metal finish only, so use the swatches to see the full range. Leverint plates the metalwork in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Because the glass is blown by hand and the metal is plated by hand, the colour and texture of your lamp may vary slightly from the photos, and screens show colour differently from one device to another. If you are unsure about a finish before ordering, please call our customer service team.

How It Works

The lamp takes one E27 bulb. It is not supplied with one as standard, but you can add Leverint's T45 LED filament bulb from the dropdown above, or choose no bulb and fit your own. Leverint lists a 40W maximum on its technical sheet, and a low wattage LED filament bulb is the sensible choice inside glass. It comes with 1.5 metres of fabric sleeved flex and an inline switch, so it is a plug in lamp: unpack it, add a bulb and a shade, and plug it in. The inline switch is on and off only, so the lamp is not dimmable as supplied. If you ever want the lamp rewired or connected to anything other than the supplied switch, have that work carried out by a qualified electrician.

Where It Works Best

With a 100mm wide glass column on a 120mm base and a height of 450mm to the top of the lamp holder, this is a tall, slim lamp that adds height without taking much table space. Leverint suggests it for modern console tables, office desks, bedside tables and similar surfaces around the home, and it works as one of a pair either side of a bed or a mirror, or on its own at the end of a console. The ribbed glass lets the bulb light show through the stacked sections as well as through the shade above.

Made By Leverint

Leverint is a hand blown glass lighting studio based in Enfield, London, where each piece of glass is shaped by hand rather than cast in a mould. The studio says it draws on more than a century of glassblowing experience through its parent company, G Farley and Sons. A stacked, pinched shape like the Queensway's is the kind of form that hand blowing makes possible, because the rings are shaped into the glass itself.

Good to Know

• Handmade to order by Leverint in the UK; Leverint quotes approximately 4 to 6 weeks, so please check the current lead time before ordering
• As a made to order lamp, it cannot be returned unless it arrives faulty
• Fabric shade not included; the taupe drum shade in the photos is for illustration only
• Takes 1 x E27, 40W max; no bulb as standard, with Leverint's T45 LED filament bulb available from the dropdown above
• Inline on and off switch as standard; not dimmable as supplied
• Glass column measures 100mm in diameter and 450mm high to the top of the lamp holder, on a 120mm base; weighs approximately 2.8kg. Please check the height against your table and your chosen shade before ordering
• 1.5 metre fabric sleeved flex with inline switch
• Hand blown glass and hand plated metal, so colour and texture may vary slightly from the photos
• CE and UKCA marked; 2 year warranty
• Polish the metalwork lightly with a lint free cloth and avoid metal cleaning solutions; clean the glass with a glass cleaner sprayed onto a lint free cloth rather than onto the lamp

Questions People Ask

Does the Queensway Table Lamp come with a shade?

No. The Leverint Queensway Table Lamp is sold as a base only, and the taupe drum shade shown in the photos is not included. It has a standard E27 lamp holder, so you can choose a shade to suit your room.

What glass and metal finishes can I choose?

The glass column comes in ribbed or fine ribbed hand blown glass. The metalwork can be plated in polished brass, brushed brass, weathered brass, bronze, polished nickel or satin nickel. Pick your combination from the swatches on this page when you order.

How tall is the Queensway Table Lamp?

The glass column is 100mm in diameter and the lamp stands 450mm high to the top of the lamp holder, before any shade is added. It sits on a 120mm base and weighs approximately 2.8kg.

Does the Queensway Table Lamp come with a bulb?

Not as standard. It takes one E27 bulb, 40W max, and you can add Leverint's T45 LED filament bulb from the bulb dropdown when you order, or choose no bulb and fit your own low wattage LED filament bulb, which runs cool inside the glass.

Is the Queensway Table Lamp dimmable?

As supplied it has an inline on and off switch and is not dimmable.

How long does it take, and can I return it?

Each Queensway Table Lamp is handmade to order by Leverint in the UK, with a lead time of approximately 4 to 6 weeks. Because it is made to order in your chosen finish, it cannot be returned unless it arrives faulty.

Diameter: 10cm
Shade Height: 45cm
Base: 12cm
Cable Length: 150cm
Height measured to top of lamp holder; shade not included.

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.