Hunza Step Light Square GU10 - Stainless Steel - Mains

A Mains Step Light in Brushed Stainless

The Hunza Step Light Square GU10 is a flush fitting for masonry, stone or wood that runs straight from the mains, so there is no transformer to hide away. Set into a step or paved edge, its square stainless face gives a tidy finish and a gentle wash of light for safe footing. It also suits paved areas, driveways and recessed uplighting.

316 Stainless Steel Outdoors

The body is marine grade 316 stainless steel, which holds a consistent brushed finish. In some environments a light surface tarnish can appear, and washing it regularly keeps that under control. A return is possible within 14 days, provided the fitting is unused, uninstalled and in original packaging.

How It Works

• Mains voltage, with no driver or transformer required.
• Takes a GU10 lamp, sold separately. A Hunza approved LED lamp must be used to keep the IP rating and warranty.
• The recessed body is 63.5mm in diameter and 90mm long, so allow a little more depth than the low voltage version.
• The flange is 88mm wide and 7mm deep, and the cut out size is 63.5mm.
• Mounting holes are fitted as standard, and are unnecessary if you install using a canister.
• Wired in parallel, rated IP67, with a 10 year warranty.
• A low voltage version of this step light is also made.

Where It Works Best

• Beside entrance steps close to the house, where a mains supply is easy to reach
• Set into a terrace or patio surface
• Along the edge of a driveway
• Recessed in a wall, aimed upward as a simple uplighter

Lighting Schemes From Moonlight Design

We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows photographs of our own completed schemes and describes how we plan, draw up and install them. Visit it if you would like to talk through a plan for your garden.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• The GU10 lamp is not supplied and is bought separately.
• Mains fitting. Installation should be carried out by a registered NICEIC electrician, as we recommend for all lighting.
• Stainless steel may show a light surface tarnish in some settings. Regular washing helps.

Questions People Ask

Does the GU10 step light need a transformer?
No. It is a mains fitting and no driver or transformer is required.

Is a lamp included?
No. The GU10 lamp is sold separately, and it must be a Hunza approved LED to keep the IP rating and warranty.

How deep is the recessed body?
The recessed body is 90mm long and 63.5mm in diameter, with a 63.5mm cut out.

What is it made from?
Marine grade 316 stainless steel, with a 10 year warranty.

Recessed body
Diameter: 63.5mm
Length: 90mm

Flange
Width: 88mm
Depth: 7mm
(refer to spec for more information)

• Hunza Step Lite Square Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.