


Hunza Step Light - Copper - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Copper Step Light That Sits Flush With the Surface
The Hunza Step Light is built to be recessed, with an 88mm flange that sits neatly against masonry, stone or wood. Set into a riser or a paved edge, it lights the way underfoot without hanging anything out into the walkway. This low voltage version is made in copper.
Copper That Weathers Naturally
Copper is a natural finish designed to change outdoors. It starts bright and warm, deepens to brown over the seasons, and can eventually turn a soft green. Against stone steps or a timber deck, that gradual darkening gives the fitting a settled look rather than a shiny one.
How It Works
- Recessed body diameter 63.5mm and length 68.5mm, so the cut out is 63.5mm.
- The flange is 88mm in diameter and 7mm deep, and 1m of cable is supplied.
- Mounting holes are fitted as standard, though you do not need them if you install it using a canister.
- The lamp is not included. Use a Hunza approved LED lamp (MR16) to keep the IP rating and warranty.
- It is low voltage and wired in parallel, so you will need a transformer, sold separately.
- Rated IP67, with a 10 year warranty.
- Choose the With or Without option when ordering.
Where It Works Best
- In the risers of garden steps, for safety as well as looks
- Along a driveway or paved area as a ground level horizontal light
- Set into a wall, where it can be used as a recessed uplighter
- In stone, masonry or timber, wherever a 63.5mm hole can be cut
How We Plan and Install Step Lighting
Moonlight Design began working with Hunza in 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows photographs of our own completed schemes and describes how we plan and draw them up. Step lighting is an important part of any exterior project, so it is worth seeing how we fit it in.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- The lamp and the transformer are both sold separately.
- Copper will darken and patinate outdoors. This is normal and not a fault.
- This fitting is also available as a GU10 mains version.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
What size hole do I need to cut?
The cut out size is 63.5mm, and the flange is 88mm across and 7mm deep.
Can I use it as an uplighter?
Yes. Besides lighting steps and ground level areas, the fitting can be used as a recessed uplighter.
Is a transformer needed?
Yes. Being low voltage and wired in parallel, it runs from a transformer that you buy separately.
Is there a mains version?
Yes, the same step light is also made as a GU10 mains fitting.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us














