Hunza Pure LED Bracket Pond Light - 12V Integral Driver - Stainless Steel with Powder Coat - Low Voltage - Submersible

Description

The Hunza PureLED Pond Light is now manufactured in Marine Grade Stainless Steel with a  Powder Coat Finish supplied with a 12V Integral Driver, bringing together the most advanced LED technology Hunza makes with the understated visual subtlety of a matt powder coat finish, in a fixed installation submersible luminaire designed for permanent placement in ponds, water features and water gardens.

With the LED driver integrated directly into the fitting, there is no separate lamp to specify or source, no external driver to find housing for, and none of the complexity that can sometimes arise in traditional lamp and driver combinations. The complete light source comes as one unit, which both simplifies the installation process and gives you confidence that every component has been designed and tested to work together in an underwater environment.

The PureLED module is genuinely impressive in its efficiency and performance. Energy consumption is reduced by over 80 percent compared to older technology, the light runs completely cool to the touch, and with a rated life of up to 50,000 hours this is a fitting that should outlast almost anything else in the garden. The Marine Grade Stainless Steel body with UV stable matt powder coat finish means the fitting sits unobtrusively in the water environment during daylight hours, in colours including matt black, matt bronze, matt dark grey and matt olive green. Fully adjustable on its arm, IP68 rated and hand assembled in New Zealand.

The wide selection of colour temperatures ranging from the very warm 2200K through to a crisper 4000K, combined with beam angle options from a tight 15 degrees to a wide 60 degrees, means this fitting can be configured to deliver almost any aesthetic quality of light you need, from an intimate warmth in a cottage garden pond to a clean, contemporary illumination in a modern water garden.

Suitable for garden ponds, koi ponds, wildlife ponds, natural swimming ponds, ornamental water features, water gardens, rill features and decorative fountains. Not intended for conventional swimming pool use.

Every lifestyle and in situ image shown here is from a real Moonlight Design project. Over more than 23 years we have been designing and installing garden lighting schemes, and the photographs you see represent genuine client gardens from our own portfolio.

If you would like to read more about planning underwater pond lighting, from choosing the right colour temperature to understanding how depth affects light output, visit our pond lighting guide on the Moonlight Design blog.

Important Notes

• This fitting has a 12V integral LED driver built in. No separate lamp is required.
• Colours are for indication only and colour swatches are available on request.
• Moonlight Design recommends that all lighting should be installed by a registered NICEIC electrician.

Body
Diameter: 62.5mm
Length: 75mm

Total Height: 151mm

Bracket extension below body
67mm
(refer to spec for more information)
Supplied with 3m cable

• Pond-Light-PONDL-Specification-Sheet 2

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.