Hunza Pure LED Euro Wall Spot Retro - Stainless Steel - Mains

A Stainless Steel Wall Spot for Mains Circuits

The Hunza Pure LED Euro Wall Spot Retro keeps the LED out of sight behind a glare guard, and it connects to an existing mains circuit. That is what Retro means here: you can swap an older fitting for this one without running low voltage cable or adding a transformer.

Solid 316 Stainless Steel

This version is 316 stainless steel with a consistent brushed finish that does not change character the way copper does. In some conditions it can show a light surface tarnish, which regular washing keeps in check.

How It Works

• The LED is shielded by the glare guard and sits on an arm that rotates 360 degrees and elevates from 0 to 90 degrees.
• A Cree LED chip is rated at 420 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
• Colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens are picked at the time of ordering.
• Body diameter 44mm and body length 80mm, on a 78mm diameter base 55mm deep, supplied with 1m of cable.
• A mains fitting wired in parallel, so no driver is required.
• This mains version is not dimmable.
• Rated IP66 with a 10 year warranty, and 5 years on the LED.

Where It Works Best

• Replacing an older mains wall light on an existing circuit
• Refreshing a scheme where the wiring is staying as it is
• Beside doors and seating where the glare guard keeps the LED discreet
• Any wall where a brushed steel look suits the surroundings

Planned and Installed by Moonlight Design

We have installed Hunza fittings in real gardens since 2003. We reach for the stainless steel Euro Retro Wall Spot on replacement jobs where the existing wiring is mains and is staying that way. On our Design Service page you can see photographs of our own completed schemes, along with how we plan the layout, draw it up and install it using NICEIC registered electricians. It is worth a visit if you are thinking about replacing or adding to an existing mains scheme.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The colour temperature, beam angle and lens are fixed when you order, so check them first.
• The LED is integrated and Hunza describes the parts as serviceable.
• This version runs on mains with no transformer, but the wiring should still be done by a competent electrician.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

What does Retro mean?
It refers to wiring onto an existing mains circuit, so no low voltage cable or transformer needs to be added.

Do I need a driver?
No. The mains version needs no driver and is wired in parallel.

Can the light be dimmed?
No. This mains version cannot be dimmed.

Is it stainless steel throughout?
The body is 316 marine grade stainless steel with a brushed finish.

Body
Diameter: 44mm
Length: 80mm

Base
Diameter: 78mm
Depth: 55mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Wall Spot PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.