Hunza Pure LED Euro Wall Spot Retro - Copper - Mains

A Copper Wall Spot for Mains Circuits

The Hunza Pure LED Euro Wall Spot Retro in copper is made for the job of replacing an older fitting on a mains circuit. It wires straight onto the existing supply, so there is no low voltage cable to run, and a glare guard shields the LED from view at typical viewing angles.

Solid Copper, Not Plated

This is solid copper, so it weathers and darkens outdoors with age, deepening in tone and in some settings developing a green verdigris. Hunza designs the finish to change in this way.

How It Works

• The glare guard softens the view of the LED, which suits the light being felt rather than seen.
• Its Cree LED chip gives 420 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
• When you order, specify colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens.
• Body diameter 44mm and body length 80mm, with a 78mm diameter base 55mm deep and 1m of cable.
• Mains powered and wired in parallel, with no driver needed.
• Not dimmable.
• IP66 rated, with a 10 year warranty and 5 years on the LED.

Where It Works Best

• Swapping an existing mains fitting for something with a glare guard
• Garden and house walls where copper suits the brick or stone
• Lighting a feature from a position where the fitting must stay unobtrusive
• Schemes where rewiring for low voltage is not wanted

Our Lighting Design Service

We have designed lighting schemes for gardens, supplied Hunza fittings and installed them since 2003. The copper Euro Retro Wall Spot suits replacement jobs where the existing wiring is mains and will remain so. Our Design Service page shows photographs of our own completed projects and explains how we plan, draw up and install each scheme with NICEIC registered electricians. Have a look if you would like help placing your lights.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Colour temperature, beam angle and lens are made to order choices, so confirm them before buying.
• The LED is integrated, with serviceable parts according to Hunza.
• No transformer is required, as this version connects to mains.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is it suitable for replacing an older mains light?
Yes. It wires onto an existing mains circuit, which is what Retro refers to.

Will the copper darken over time?
Yes. It weathers outdoors, deepening in tone and in some settings turning green, which Hunza intends.

Is a driver or transformer required?
No. It is a mains fitting and needs no driver.

Can it be dimmed?
No, this mains version is not dimmable.

Body
Diameter: 44mm
Length: 80mm

Base
Diameter: 78mm
Depth: 55mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Wall Spot PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.