Hunza Pure LED Euro Twin Wall Spot Retro - Stainless Steel - Mains
Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
10 years (LED 5 years) Warranty
Hassle-Free Returns
20+ Years of Experience
Free UK Delivery*
A Simple Mains Twin Spot for the Wall
Where the low voltage wall spot needs a remote driver, the Retro version of the Hunza Pure LED Euro Twin Wall Spot connects to the mains directly. It carries two independently aimed spotlights on a compact stainless bar, useful for pathways and for picking out features of a building. You get the same small heads on a larger, deeper base.
316 Stainless Steel, Brushed and Consistent
The fitting is made from marine grade 316 stainless steel with a consistent brushed finish. In certain environments it can pick up a light surface tarnish, and regular washing keeps that in check. Solid copper is also available on this model for anyone who wants the metal to patina.
How It Works
- Each head rotates 360 degrees and tilts 0 to 90 degrees.
- Cree LED chips provide 420 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
- You can order 2200K, 2700K, 3000K or 4000K, a 15, 25, 38 or 60 degree beam, and a clear or frosted lens.
- Head bodies measure 44mm by 80mm. The bar is 38mm in diameter and 140mm long, the base 78mm in diameter and 55mm deep, and 1m of cable is supplied.
- A mains fitting wired in parallel, so no driver is required.
- It is not dimmable.
- Rated IP66, with the 10 year warranty covering the LED for 5 years.
Where It Works Best
- By a back door or side gate where a mains spur is already available
- Along a house wall, aimed at the path below
- On a courtyard wall to light planters and seating
- Where you want a fitting with no transformer and no extra boxes
Our Lighting Design Service
We have been working with Hunza since 2003. Moonlight Design designs lighting schemes for gardens, supplies Hunza fittings and installs them. The project photographs on our Design Service page are our own completed schemes, and the page explains how we plan, draw up and install each one with NICEIC registered electricians. If you would like us to plan the lighting for your garden, start there.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- LED chips are built in, and the parts can be serviced.
- No driver is needed with this mains version, though it is not dimmable.
- Allow room on the wall for the 78mm wide, 55mm deep base.
- Stainless steel can pick up a light surface tarnish in some settings, and a regular wash keeps it clear.
- We recommend installation by a registered NICEIC electrician.
Questions People Ask
Is a driver needed for this wall spot?
No. This is the mains Retro version and no driver is required.
What is the fitting made of?
Marine grade 316 stainless steel, with a brushed finish.
How many lights does it have?
Two. Each has a Cree LED chip and can be aimed on its own through 360 degrees and 0 to 90 degrees of tilt.
Is it dimmable?
No. The mains Retro version cannot be dimmed.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.
Specifications
What Our Customers Say About Us