Hunza Pure LED Euro Twin Pole Light Retro - Stainless Steel - Mains

The Mains Twin Pole Light, Ready to Connect

The Retro version of the Hunza Pure LED Euro Twin Pole Light does the same job as the low voltage model, but runs from the mains with no separate driver. Two small spotlights sit on a slim 800mm pole, aimed wherever you need them, to light paths and low planting. Turn the heads downward and no light reaches upward at all. It is a tidy option when you would rather not run low voltage cable.

Stainless Steel Made for the Weather

The metalwork is marine grade 316 stainless steel with a consistent brushed finish. Like all stainless it can pick up a light surface tarnish in some environments, and a regular wash keeps it in check. The Retro pole light is also made in solid copper if you prefer a finish that changes over time.

How It Works

• Both arms rotate 360 degrees and tilt 0 to 90 degrees, and each head has a built in glare guard.
• There is a Cree LED chip in each head, delivering 420 lumens from 4 watts at 700mA with a CRI of 90 or more at 3000K.
• Choose colour temperature (2200K, 2700K, 3000K or 4000K), beam angle (15, 25, 38 or 60 degrees) and a clear or frosted lens when ordering.
• The head bodies measure 44mm across by 80mm long. The pole is 38mm across (63.5mm at its widest point) and 800mm long, with 1m of cable supplied.
• Runs from the mains, so no driver is required. It is wired in parallel.
• This version is not dimmable.
• Carries an IP56/IP66 rating and a 10 year warranty, with 5 years on the LED.

Where It Works Best

• Beside a driveway or garden path where a mains supply is already close
• In a long border where you want identical fittings without a driver for each run
• Next to steps or a terrace edge, with the heads turned down
• Wherever a simple mains connection suits the project better than low voltage cabling

Garden Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Have a look at the project photographs on our Design Service page, which show our own completed schemes and how we plan, draw up and install them. It is a useful read if you want to see how mains and low voltage lights are mixed in one garden.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The LED chips are integrated and the parts are serviceable.
• This is a mains fitting and needs no separate driver, but it is not dimmable.
• Mains connection must be carried out by a qualified electrician.
• Stainless steel may show a light surface tarnish in some settings, which a regular wash will deal with.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Do I need a driver for the Retro pole light?
No. It is a mains version and the specification says no driver is required.

Can this version be dimmed?
No. The mains Retro version is not dimmable. The low voltage pole light can be dimmed with a suitable dimmable driver.

How are the heads adjusted?
Each head rotates 360 degrees and tilts from 0 to 90 degrees, and has a built in glare guard.

What is the warranty?
The warranty is 10 years, with 5 years on the LED.

Bodies
Diameter: 44mm
Length: 80mm

Pole
Diameter: 38mm (63.5mm at widest point)
Length: 800mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Twin Pole Lite PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.