Hunza Pure LED Euro Sign Light Retro - Copper - Mains

Copper Sign Lighting Straight From the Mains

Not every sign has a low voltage cable run behind it. The Hunza Pure LED Euro Sign Light Retro in copper is built for those spots, with the driver already taken care of so it connects to the mains directly. A 500mm arm carries an adjustable head that rotates 360 degrees and tilts 0 to 90 degrees, so you can aim it at a sign, a wall display or a feature of the building. The integrated Cree LED chip is serviceable.

Why Solid Copper Suits a Sign

This version is made from solid copper, which Hunza designs to weather naturally. Expect a bright, warm colour at first, then a slow shift to brown and eventually soft green. The finish only gets more characterful on an old wall or a traditional frontage. Those who prefer it unchanged can choose the stainless steel Retro.

At a Glance

• Mains powered, no driver required, and not dimmable.
• 420 lumens at 700mA from 4 watts, with a CRI of 90 or more at 3000K.
• Options for 2200K, 2700K, 3000K or 4000K, beam angles of 15, 25, 38 or 60 degrees, and a clear or frosted lens.
• 44mm diameter head, 80mm long, on a 500mm arm of 38mm diameter.
• 78mm diameter base, 55mm deep, with 1m of cable supplied.
• IP66 rated, with a 10 year warranty and 5 years on the LED.

Where We Would Put It

• Over an old stone or brick wall that carries a house name
• Above the entrance board to a farm shop, pub or holiday let
• On a wall to light a plaque or memorial

Moonlight Design Experience With Hunza

We have been working with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them. Our Design Service page has project photographs of our own completed schemes, and it explains how we plan, draw up and install them with NICEIC registered electricians. You are welcome to visit it and see how we approach a project.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• Mains version, so it cannot be dimmed.
• Copper naturally deepens in colour outdoors, so do not be alarmed when it darkens.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is this the mains or the low voltage version?
It is the mains Retro version, so no separate driver is required.

Does the copper need sealing or polishing?
No. Hunza designs solid copper to be left outdoors and patina, deepening to brown and eventually green.

How long is the arm?
The arm is 500mm long and 38mm in diameter.

How is the LED warranted?
The fitting has a 10 year warranty, and the LED is covered for 5 years.

Body
Diameter: 44mm
Length: 80mm

Pole
Diameter: 38mm
Length: 500mm

Base
Diameter: 78mm
Depth: 55mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Euro Sign Lite PureLED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.