Hunza Pure LED Bollard 700mm (Spike Mounted) Retro - Powder Coat - Mains

Mains Powered Path Light, Ready for Simple Wiring

The Retro version of the Hunza Pure LED Spike Bollard is made for people who would rather not run low voltage cable and a separate driver. It connects to the mains, stands 685mm tall and lights the ground and the area around it with a two angle reflector. The Cree LED is integrated and the parts are serviceable.

Seven Powder Coated Colours

This one is aluminium with a baked on powder coat, offered in Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star. The colours shown are indicative only, so ask us for swatches if the shade matters to you.

How It Works

• Mains powered, with no driver required, and wired in parallel.
• The LED gives 112 lumens from 4 watts at 700mA, with a CRI of 90 or more at 3000K.
• You pick 2200K, 2700K, 3000K or 4000K when ordering.
• The reflector has a mirror finish and sits behind a UV stable acrylic lens with an anti glare mesh.
• Diameter 63.5mm and height 685mm, supplied with 1m of cable.
• This version is not dimmable.
• IP56/IP66 rated with a 5 year warranty.
• If you want to dim the light or run a series circuit, the low voltage Pure LED Spike Bollard is the alternative.

Where It Works Best

• On a short run of path where a single mains feed is easy to reach
• At the edge of a drive, a gravel court or a parking space
• In planted borders next to a house or outbuilding
• Refurbishments where adding low voltage cabling and a driver would be awkward

Planning and Installing With Hunza Experience

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them in real gardens. The photographs on our Design Service page show our own completed schemes, and how we plan, draw up and install them with NICEIC registered electricians. If you want help working out where the mains supply and each bollard should go, that page is the place to start.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Matt Black and Matt Bronze can be returned within 14 days of delivery if unused, uninstalled and in the original packaging.
• Matt Olive Green, Matt White, Matt White Birch, Matt Dark Grey and Matt Silver Star are made to order and are not returnable unless faulty or damaged.
• Mains fittings need a competent, qualified electrician to connect them.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Does the Retro bollard need a driver?
No. It is a mains fitting and no driver is required.

Can it be dimmed?
No. The mains Retro version is not dimmable.

What colours can I choose?
Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star in a powder coat finish.

How is it different from the low voltage version?
It runs from the mains in parallel with no remote driver, at 112 lumens from 4 watts, where the low voltage bollard gives 510 lumens from 6 watts and can be dimmed.

Diameter: 63.5mm
Height: 685mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Bollard 700 Pure LED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.