Hunza Pure LED Bollard 700mm (90mm Flange Mounted) Retro - Powder Coat - Mains

A Mains Bollard With No Driver to Hide

The Retro version of the 700mm Hunza Pure LED Bollard is made for people who would rather not run low voltage cable. It runs on mains with no separate driver needed, and it stands 688mm tall on a 90mm flange in powder coated aluminium. A mirror finished reflector sends light down and outward behind an anti glare mesh.

Powder Coat in Seven Colours

The colour is a baked on powder coat over aluminium, offered in Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star. Request a swatch if you want to check a colour before ordering. Take note of the returns terms below, as most colours are made to order.

How It Works

• Mains powered, so no driver is required, and wired in parallel.
• Cree LED chip giving 112 lumens from 4 watts at 700mA, CRI 90 or more at 3000K.
• Not dimmable.
• 2200K, 2700K, 3000K and 4000K are available.
• Body diameter 63.5mm, height 688mm, flange 90mm, supplied with 1m of cable.
• IP56/IP66 rated with a 5 year warranty.
• The LED chip is replaceable and the parts are serviceable.

Where It Works Best

• Along a drive where you want to avoid a low voltage cable run
• At gateways and entrances, supplied from a nearby mains point
• Beside paths in larger gardens or around car parks
• Anywhere you would like simple, consistent lighting without dimming

Planning Your Scheme With Moonlight Design

Hunza fittings have been part of our own garden projects since 2003. We design lighting schemes for gardens, supply the fittings and install them in real gardens. Our Design Service page shows photographs of our own completed schemes and explains how we plan, draw up and install a layout with NICEIC registered electricians. If you are choosing between mains and low voltage, that is a good place to start the conversation.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Matt Black and Matt Bronze can be returned within 14 days of delivery if unused, uninstalled and in original packaging. Matt Olive Green, Matt White, Matt White Birch, Matt Dark Grey and Matt Silver Star are made to order and non returnable unless faulty or damaged.
• Mains version, so it needs a qualified electrician for the connection.
• It cannot be dimmed.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Do I need a driver for the Retro bollard?
No. The Retro is a mains version and no driver is required.

Can I dim the Retro bollard?
No. It is not dimmable.

How bright is it?
It gives 112 lumens from 4 watts at 700mA.

What is the warranty on the powder coated Retro?
It is covered by a 5 year warranty.

Body
Diameter: 63.5mm
Height: 688mm

Flange
Diameter: 90mm
(refer to spec for more information)
Supplied with 1m cable

• Hunza Bollard 700 Pure LED Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.