Hunza Lawn Light GU10 - Cast Solid Bronze - Mains

A fully cast solid bronze lawn light on mains power

The Hunza Lawn Light GU10 in cast solid bronze is solid bronze from the fluted body right up through the flange, not just a bronze ring on top of something else. It sits flush in turf and throws a narrow column of light straight up rather than spreading sideways, and it runs directly on mains power.

Cast bronze, top to bottom

Every part of this fitting you can see, and the body buried beneath it, is solid bronze. That makes it the toughest version of the Lawn Light Hunza makes: it copes with regular mowing, high soil acidity, salt spray and heavy fertiliser use without the finish chipping or wearing through. Left outdoors, the bronze will darken and develop a natural patina over time, which Hunza treats as part of the design rather than a fault.

How it works

The head directs light up to 20 degrees off vertical, enough to angle the beam toward a nearby tree or shrub rather than straight up. A flush fit lens sits level with the lawn surface to stop water and dirt pooling on the glass. The recessed body runs around 90mm long, set into a 146mm flange 13.5mm deep.

It isn't supplied with a bulb, and to keep the IP rating and warranty valid, it must be run with a Hunza approved GU10 LED lamp. Because it runs on mains voltage, it doesn't need a transformer. The same fixture is also available as a low voltage version if you'd rather run it through a transformer with the rest of a low voltage circuit.

Where it works best

Suited to lawns that see regular mowing, high footfall, or ground conditions like heavy fertiliser or salt spray that would wear a lighter finish, in installations already wired for mains rather than low voltage.

Our experience with Hunza

Moonlight Design has specified Hunza fittings since we were founded in 2003, and this cast bronze version is the one we tend to recommend when a client tells us their lawn gets mown every week, whichever voltage suits the rest of their scheme.

Good to know

• Made to order: usually ships within 2 to 3 days. If temporarily out of stock, allow 3 to 5 weeks.
• Returns: this fitting can be returned within 14 days of delivery if unused, uninstalled and in original packaging.
• Not supplied with a bulb. A Hunza approved GU10 LED lamp is required to keep the IP rating and warranty valid.
• Runs on mains voltage, so no transformer is needed.
• Solid bronze throughout, including the buried body, so it can be safely mown over and used in high acidity or salty ground.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Is the body solid bronze as well as the flange?
Yes. Unlike the standard Solid Bronze Lawn Light, which pairs a bronze flange with a powder coated aluminium body, this cast version is solid bronze all the way through.

Can I mow over this light?
Yes, it's designed to take regular mowing without the finish chipping, which is why it's the version Hunza recommends for lawns with high soil acidity, salt content or heavy fertiliser use.

Do I need a transformer for this light?
No. This is the mains version, so it wires directly into a standard mains circuit.

Does it come with a bulb?
No. It takes a Hunza approved GU10 LED lamp, bought separately, which is required to keep the IP rating and 10 year warranty valid.

Is there a low voltage version?
Yes, the same fixture is available as a low voltage version for installations already running a transformer.

Recessed body
Length tbc 90mm

Flange
Diameter: 146mm
Depth: 13.5mm
(refer to spec for more information)

• Hunza MR16 and GU10 Lawn Lite Solid Cast Bronze Spec Sheet

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.