Hunza High Power Wall Spot with Integral Driver - Powder Coat - Mains

A Higher Output Spotlight With the Driver Built In

The Hunza High Power Wall Spot is built for situations where the standard Wall Spot does not put out enough light: taller trees, larger architectural features, or spots further from the wall than a standard beam can reach comfortably. It keeps the same fully adjustable head, giving 360 degree rotation and 0 to 90 degree elevation, but with a higher output LED and its own driver inside the fitting rather than a separate remote unit.

The Extra Corrosion Protection

All High Power fittings get an additional powder coat layer for corrosion protection, over the standard seven colour options: Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star.

How It Works

• The driver is integral, so no remote driver needs installing elsewhere, unlike Hunza's standard low voltage PureLED fittings.
• A replaceable Cree LED chip delivers 1200 lumens from 12 watts, with a CRI of 85 or more at 3000K.
• When you order, choose colour temperature (2700K, 3000K or 4000K), beam angle (15, 30, 40 or 70 degrees) and lens (clear or frosted).
• Body diameter 63.5mm and length 130mm, on a 120mm diameter base 58mm deep.
• Dimmable with 0 to 10 volt dimming, wired in parallel.
• Rated IP66 and backed by a 5 year warranty.

Where It Works Best

Reach for this when a standard Wall Spot would be underpowered: taller specimen trees, larger sculptural features, or anything further from the wall than a standard beam comfortably reaches.

How We Plan and Install Hunza Lighting

Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians, and we choose the High Power line when a project genuinely needs more output than the standard Wall Spot gives. Our Design Service page features project photographs of our own completed schemes, and explains how we plan and draw up a layout. Have a look if you want help choosing where a spotlight like this should go.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns: all High Power Wall Spot orders are made to order and cannot be returned unless the item is faulty. Please check your colour, colour temperature, beam angle and lens choice carefully before ordering, as orders cannot be cancelled once placed.
• The driver is built into the fitting.
• Runs on mains.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

When should I choose this over the standard Wall Spot?
When you need more reach or brightness, for example on taller trees or larger features.

Can I aim it?
Yes. The head rotates 360 degrees and tilts through 0 to 90 degrees of elevation.

Does it need a separate driver?
No. The driver is built in and the fitting runs on mains.

Is it dimmable and weatherproof?
It dims with 0 to 10 volt dimming and is rated IP66.

Body
Diameter: 63.5mm
Length: 130mm

Base
Diameter: 120mm
Depth: 58mm
(refer to spec for more information)

• Hunza High Power Wall Spot Pure LED Spec Sheet
• High Power Series Brochure

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.