Hunza High Power Wall Down Light with Integral Driver - Powder Coat - Mains

A Higher Output Wash Light for Bigger Surfaces

The Hunza High Power Wall Down Light is built for jobs where the standard Down Light does not put out enough light, such as taller walls, larger gable ends or commercial elevations. It keeps the same fixed head and one direction wash, but with a higher output LED and its own driver built into the fitting rather than a separate remote unit.

The Finned Body and Powder Coated Finish

You will notice the body has a finned, heat sink style casing rather than the smooth cylinder of the standard Down Light, there to manage the heat a higher output LED produces. Hunza then adds an extra powder coat layer on High Power fittings specifically for corrosion protection, on top of the standard seven colour options: Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star.

How It Works

• The driver is integral, so there is no separate remote driver to install elsewhere in the circuit, unlike Hunza's standard low voltage PureLED fittings.
• A replaceable Cree LED chip gives 1200 lumens in total, with a CRI of 85 or more at 3000K.
• At the point of ordering you choose colour temperature (2700K, 3000K or 4000K), beam angle (15, 30, 40 or 70 degrees) and lens (clear or frosted).
• The body is 63.5mm in diameter and 130mm long, on a 120mm diameter base 58mm deep, so it is a noticeably larger fitting than the standard Down Light.
• Dimmable using 0 to 10 volt dimming, wired in parallel.
• Rated IP66 with a 5 year warranty.

Where It Works Best

This is the fitting to reach for when a standard Down Light would be underpowered: tall building elevations, larger commercial fascias, or garden walls where you need the wash to carry further and read clearly rather than fade halfway up.

Lighting Schemes by Moonlight Design

Moonlight Design has worked with Hunza since 2003, and the High Power line is what we specify when a scheme genuinely needs more output than the standard fittings give. We design lighting schemes for gardens, supply Hunza fittings and install them. The project photographs on our Design Service page show our own completed schemes, and how we draw up and install them with NICEIC registered electricians. If a tall wall or large elevation needs lighting, a visit to that page is a good first step.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns: all High Power Down Light orders are made to order and cannot be returned unless the item is faulty. Please check your colour, colour temperature, beam angle and lens choice carefully before ordering, as orders cannot be cancelled once placed.
• No separate remote driver is needed because the driver is built in.
• Runs on mains.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

How is this different from the standard Down Light?
It has a higher output LED giving 1200 lumens, a finned body to manage the heat, and a built in driver.

Do I need a separate driver?
No. The driver is integral and the fitting runs on mains.

Can it be dimmed?
Yes, using 0 to 10 volt dimming.

Is it rated for outdoor use?
Yes. It is rated IP66 and carries a 5 year warranty.

Body
Diameter: 63.5mm
Length: 130mm

Base
Diameter: 120mm
Depth: 58mm
(refer to spec for more information)

• Hunza High Power Down Lite Pure LED Spec Sheet
• High Power Series Brochure

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.