Hunza High Power Tree Mount with Integral Driver - Powder Coat - Mains

Moonlight From the Branches

The Hunza High Power Tree Mount is made to be fixed onto a tree, so the light comes from above and falls through the canopy and onto the ground below. Used this way it creates a moon lighting effect, brings light into the higher parts of the tree, or cross lights toward other tall objects nearby. This is the mains version with the driver built in, so there is no separate driver to hide in the garden.

Powder Coated Aluminium in Seven Colours

The body is powder coated aluminium, with the colour baked on. You can choose Black, Dark Grey, White, Birch, Bronze, Olive Green or Silver Star to blend with bark and foliage. Colours are indicative only, and swatches are available on request. Hunza also adds an extra powder coat layer across its High Power range for maximum corrosion protection.

How It Works

• Mounts with stainless steel bolts or a rubber strap, depending on the option you choose.
• Cree replaceable LED chip giving 1200 lumens in total at 700mA, CRI 85 or more at 3000K.
• Choose 2700K, 3000K or 4000K and a beam angle of 15, 30, 40 or 70 degrees. A narrow beam reaches further up a tall tree.
• Body diameter 63.5mm and length 130mm, a retro base 63.5mm in diameter and 205mm long, and a tree mount 105mm in diameter and 50mm deep.
• Mains with an integral driver and parallel wiring. Dimmable with 0 to 10 volt dimming.
• Rated IP66 with a 5 year warranty.

Where It Works Best

• High in a mature oak, beech or pine to throw soft light down through the branches
• On a tree beside a lawn or terrace to give a moonlit feel to the whole area
• Pointing across a garden to light a tall wall or a neighbouring tree
• Anywhere a ground level spike would not reach the upper canopy

Planning Your Scheme With Us

Hunza has been a Moonlight Design partner since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. The Design Service page shows our own completed schemes and explains how we plan and draw them up. Visit it if you would like moon lighting planned for a tree in your garden.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Matt Black and Matt Bronze can be returned within 14 days of delivery if unused, uninstalled and in original packaging. Matt Olive Green, Matt White, Matt White Birch, Matt Dark Grey and Matt Silver Star are made to order and non returnable unless faulty or damaged.
• Mains version with the driver built in. No separate driver is needed.
• Choose bolt or rubber strap mounting when you order.
• Colours are for indication only and swatches are available on request.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

What is a tree mount light for?
It is fixed to a tree to create a moon lighting effect, lift illumination in the higher canopy, or cross light into other tall objects.

How is it attached?
It is available with stainless steel mounting bolts or a rubber strap.

Can it be dimmed?
Yes. It is listed as dimmable with 0 to 10 volt dimming.

What colours can I choose?
Black, Dark Grey, White, Birch, Bronze, Olive Green and Silver Star, all powder coated.

Body
Diameter: 63.5mm
Length: 130mm

Retro base
Diameter: 63.5mm
Length: 205mm

Tree mount
Diameter: 105mm
Depth: 50mm
(refer to spec for more information)

• Hunza High Power Tree Mount Pure LED Spec Sheet
• High Power Series Brochure

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.