Hunza High Power Safe Touch 50 with Integral Driver - Stainless Steel - Mains

Mains Powered and Dimmable in a Small Footprint

The Hunza Safe Touch 50 with Integral Driver is a compact in ground light that connects straight to the mains, with the driver built into the fitting. Public safety shaped the design: a cool lens, clean light, low energy use and very little maintenance. Rotate the gimbal 360 degrees and tilt it 0 to 20 degrees to place the beam where you want it. It can be specified with or without a canister.

Marine Grade Stainless Steel

Stainless steel here means marine grade 316, with a brushed finish that stays consistent over time. In some environments a light surface tarnish can appear, which regular washing will keep in check. The extra powder coat layer found across Hunza High Power gives added corrosion protection.

How It Works

• The driver is integral and wiring is parallel, so there is no separate driver to site.
• Dimmable with 0 to 10V dimming.
• Replaceable Cree LED chip, 1200 lumens in total at 700mA, CRI 90 or more at 3000K.
• Choose 2700K, 3000K or 4000K and a 15, 30, 40 or 70 degree beam.
• Body length 175mm, flange diameter 146mm, cut out 150mm, supplied with cable.
• Maximum vehicle speed 10km/h (6mph), maximum load rating 2000kg (4400lbs).
• IP67 (not for pools or ponds), with a 10 year warranty and 5 years on the LED.

Where It Works Best

• Lighting a feature tree from the lawn, with the option of dimming for evening mood
• In stone paving beside a house, washing the wall with a narrow beam
• Along the edge of a drive where a small, strong fitting is needed
• Anywhere you would prefer to avoid a remote driver and low voltage cable runs

Experience Behind the Installation

Moonlight Design has been a Hunza specialist since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them in real gardens. The Design Service page shows photographs of our own finished schemes and sets out how we plan, draw up and install them with NICEIC registered electricians. Have a look if you would like a hand choosing between mains and low voltage.

Good to Know

• Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
• Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
• The driver is built in, so no separate driver is needed.
• Dimming uses a 0 to 10V control.
• Stainless steel may show a light surface tarnish in some places.
• We recommend installation by a registered NICEIC electrician.

Questions People Ask

Can I dim this mains version?
Yes. It is listed as dimmable with 0 to 10V dimming.

Is a separate driver needed?
No. The driver is built in and the fitting is listed as mains, no driver required.

How large is the fitting?
The body is 175mm long with a 146mm flange diameter, and the cut out is 150mm.

Is it suitable for pools?
No. Despite the IP67 rating, it is not for use in pools or ponds.

Body
Length: 175mm

Flange
Diameter: 146mm
(refer to spec for more information)
Supplied with cable

• Hunza High Power Safe Touch 50 Pure LED Spec Sheet
• High Power Series Brochure

We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).

*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.