


Hunza Floor Light GU10 - Copper - Mains

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Copper Ground Uplighter for Mains Wiring
Slim, flush and made of solid copper, the Hunza Floor Light GU10 sits in the ground and sends light upward. It has an extremely low profile and can be walked on without damaging the luminaire. Because it is a mains fitting, there is no driver or transformer to hide away. A mounting canister is supplied, and the GU10 lamp is bought separately.
Copper Made to Age
Hunza makes this fitting from solid copper, a high purity alloy with a minimum copper content of 99.9 percent, and designs it to weather outdoors. It starts out bright and warm, then deepens to brown and gradually to a soft green. Hunza explains that this patina acts as a protective layer that guards the metal against further corrosion, and the colour is the metal itself rather than a coating. For a finish that remains consistent, there is a stainless steel version.
Specification
- Canister diameter 76mm, length 148mm, base 100mm.
- Flange 88mm across and 3mm deep, with a 63.5mm cut out.
- Mains operation, no driver required, wired in parallel.
- Lamp sold separately. Use a Hunza approved GU10 LED to keep the IP rating and warranty.
- IP67 rated and covered by a 10 year warranty on the copper.
- A low voltage version is also available if you prefer MR16.
Ideas for Using It
- Beside a house wall to graze it with warm light
- Under a mature tree or climber
- Set into a patio edge
- Close to an entrance, where a neat copper flange suits brick or stone
Garden Lighting Schemes by Moonlight Design
We have worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. Our Design Service page shows photographs of our own completed schemes and how we plan, draw up and install them. If you are thinking about a mains scheme for your garden, start there.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- The GU10 lamp is not supplied and should be a Hunza approved LED.
- This mains version needs no driver.
- Hunza says its floor lights must not be pressure washed.
- Solid copper will patina outdoors. This is normal and not a fault.
- Moonlight Design recommends that all lighting is installed by a registered NICEIC electrician.
Questions People Ask
Is this copper fitting low voltage?
No. This GU10 version is a mains fitting and needs no driver. A low voltage MR16 version is sold separately.
Will the finish change?
Yes. Solid copper patinas, moving from bright copper to brown and eventually green.
Which lamp fits?
A GU10 lamp, and it should be a Hunza approved LED to maintain the IP rating and warranty. The lamp is not supplied.
What size is the canister?
It is 148mm long and 76mm in diameter.
Can I clean it with a pressure washer?
No. Hunza states that its floor lights must not be pressure washed.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us














