


Hunza Floor Light Dark Lighter Square - Stainless Steel - Low Voltage

Pay in 3 with Klarna
Rated five stars by thousands of customers since 2014 - see our full review history here
A Square Flange for Cleaner Architectural Lines
The Hunza Floor Light Darklighter Square is a compact uplighter with minimal glare, finished with a square flange rather than a round one. That makes it easy to line up with paving slabs, deck boards or the edge of a terrace, and the matt black interior gives further glare control. This is the stainless steel low voltage version, supplied with a mounting canister.
Marine Grade 316 Stainless Steel
Made from marine grade 316 stainless steel, it keeps a steady brushed appearance outdoors. Stainless steel can acquire a light surface tarnish in some environments, so an occasional wash is worth doing. Prefer a warmer, changing finish? The same Square Darklighter comes in solid copper.
Technical Notes
- The flange is square, 88mm wide and 7mm deep.
- The canister is round, 76mm in diameter and 203mm long, on a 100mm base. It is supplied with 1m of cable.
- Cut out size is 63.5mm.
- The lamp is sold separately. A MR16 Hunza approved LED must be used to keep the IP rating and warranty.
- Low voltage and wired in parallel, so it needs a transformer.
- IP67 rated, with a 10 year warranty.
Where It Works Best
- In contemporary schemes with square paving, decking or steps
- Beside a wall or screen that you want to wash with light from below
- At the foot of a clean lined planter or tree pit
- Near seating, where the matt black interior keeps glare low
Garden Lighting Schemes by Moonlight Design
Moonlight Design has worked with Hunza since 2003. We design lighting schemes for gardens, supply Hunza fittings and install them with NICEIC registered electricians. On our Design Service page you will find photographs of our own completed schemes and a look at how we plan, draw up and install them. It is a good place to start if you are weighing up where to put lights.
Good to Know
- Made to order: usually ships within 2 to 3 days. If your specification is temporarily out of stock, allow 3 to 5 weeks.
- Returns accepted within 14 days if the fitting is unused, uninstalled and in its original packaging.
- No lamp is supplied, and it should be a Hunza approved LED.
- A transformer is required.
- Light surface tarnish can appear on stainless steel and regular washing helps.
- Moonlight Design recommends that all lighting is installed by a registered NICEIC electrician.
Questions People Ask
What is square about this fitting?
The flange is square, measuring 88mm wide and 7mm deep. The canister beneath it is round.
Does it have a glare shield?
It has a matt black interior, which gives further glare control on a compact uplighter that already has minimal glare.
What cut out do I need?
The cut out size is 63.5mm.
Is it low voltage?
Yes. It needs a transformer and is wired in parallel.
We offer free standard delivery on orders within the UK Mainland* (an additional fee applies for the Isle of Wight, the Isle of Man, the Scottish Isles, parts of Scotland, Northern Ireland, the Republic of Ireland, the Channel Isles and International).
*Collingwood orders under £150 incur a delivery fee of £9.95 inc. VAT.
*Any order under £49 incurs a delivery fee of £9.95.

Specifications
What Our Customers Say About Us














